https://www.lakesidemolds.com Lakeside Molds is your source for quality machined molds for making lures and weights to be used for both fresh water and salt water sports fishing. Telephone: 701-520-1872 120779481 15 inch GIANT Curled Tail Grub Worm Aluminum Soft Plastic Bait Mold Proudly made in the USA! 15 inch Curled Tail Grub Worm Mold The actual finished lure after the spru and runner is cut off weights 3.2 oz The total material for the Spru, Runner and Lure is 4.2 oz Diameter of the main ribbed body is aprx 1 1/4" Each Mold plate is 1 inch thick, so this helps cool down the lure quickly. Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/15-inch-curled-tail-grub-worm-aluminum-soft-plastic-bait-mold https://assets.bigcartel.com/product_images/429876288/Grub+1.jpg https://assets.bigcartel.com/product_images/429876258/15+inch+Grub.jpg,https://assets.bigcartel.com/product_images/429876291/20260822_172741.jpg 120779481 new in stock 120527802 4 oz Bank Sinker - 14 Cavity Proudly made in the USA! 4 oz Bank Sinker 14 cavity Production Mold ( You read that right.... 14 Cavities !! ) Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/4-oz-bank-sinker-14-cavity https://assets.bigcartel.com/product_images/428972001/4+oz+Bank.jpg 120527802 new in stock 120427188 5 inch Stick Worm ( 10 Cavity ) Aluminum Soft Plastic Bait Mold Proudly made in the USA! 5 inch Stick Worm Mold - 10 Cavity! Mold features air vents to prevent air pockets and flashing during the injection process. Total weight of material to help determine what sized injector you will need: 3.32 oz of material ( includes the spru and runner ) 2.68 oz of material ( with spru and runner removed ) Spru setup for 5/8" Nozzle This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 138.00 USD https://www.lakesidemolds.com/product/5-inch-stick-worm-10-cavity-aluminum-soft-plastic-bait-mold https://assets.bigcartel.com/product_images/428586603/Stick+Worm+Pic+1.webp https://assets.bigcartel.com/product_images/428586600/Stick+Worm+Pic+2.webp,https://assets.bigcartel.com/product_images/428586594/Stick+Worm+Pic+4.webp,https://assets.bigcartel.com/product_images/428586591/Stick+Worm+Pic+5.webp,https://assets.bigcartel.com/product_images/428586597/Stick+Worm+Pic+3.webp 120427188 new in stock 120407019 5.25 inch Paddle Tail Worm Mold Aluminum Soft Plastic Bait Mold Proudly made in the USA! 5.25" Paddle Tail Worm Mold - 10 Cavity! Mold makes Lures that are aprx 5 1/4 " inch in length This lure has FANTASTIC Tail Action! Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 138.00 USD https://www.lakesidemolds.com/product/525-inch-paddle-tail-worm-mold-aluminum-soft-plastic-bait-mold https://assets.bigcartel.com/product_images/428499291/Paddle+Tail+Worm+-+Pic+1.webp https://assets.bigcartel.com/product_images/428499288/Paddle+Tail+Worm+-+Pic+2.webp,https://assets.bigcartel.com/product_images/428499282/Paddle+Tail+Worm+-+Pic+3.webp,https://assets.bigcartel.com/product_images/428499276/Paddle+Tail+Worm+-+Pic+5.webp,https://assets.bigcartel.com/product_images/428499279/Paddle+Tail+Worm+-+Pic+4.webp,https://assets.bigcartel.com/product_images/428499267/Paddle+Tail+Worm+-+Pic+6.webp 120407019 new in stock 120285789 2 oz Round Jighead - grouper, snapper, amberjack, and others Proudly made in the USA! 2 oz Round Jighead x 5 cavity Saltwater species like grouper, snapper, amberjack, and other large reef or bottom-dwelling fish Freshwater species such as large bass, pike, muskie, or catfish, especially when fishing deep or fast-moving water. These jigs use Mustad 32786 6/0 or 7/0 hooks This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 168.00 USD https://www.lakesidemolds.com/product/2-oz-round-jighead-grouper-snapper-amberjack-and-others https://assets.bigcartel.com/product_images/428060196/Round+Jihead+Pic+4.webp https://assets.bigcartel.com/product_images/428060202/Round+Jihead+Pic+2.webp,https://assets.bigcartel.com/product_images/428060205/Round+Jihead+Pic+1.webp,https://assets.bigcartel.com/product_images/428060193/Round+Jihead+Pic+5.webp,https://assets.bigcartel.com/product_images/428060199/Round+Jihead+Pic+3.webp 120285789 new in stock 120285732 3 oz Round Jighead - grouper, snapper, amberjack, and others Proudly made in the USA! 3 oz Round Jighead x 5 cavity Saltwater species like grouper, snapper, amberjack, and other large reef or bottom-dwelling fish Freshwater species such as large bass, pike, muskie, or catfish, especially when fishing deep or fast-moving water. These jigs use Mustad 32786 6/0 or 7/0 hooks This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 168.00 USD https://www.lakesidemolds.com/product/3-oz-round-jighead-grouper-snapper-amberjack-and-others https://assets.bigcartel.com/product_images/428060055/Round+Jihead+Pic+4.webp https://assets.bigcartel.com/product_images/428060061/Round+Jihead+Pic+2.webp,https://assets.bigcartel.com/product_images/428060064/Round+Jihead+Pic+1.webp,https://assets.bigcartel.com/product_images/428060052/Round+Jihead+Pic+5.webp,https://assets.bigcartel.com/product_images/428060058/Round+Jihead+Pic+3.webp 120285732 new in stock 120191577 4 1/2 inch finesse worm ( 10 Cavity ) Aluminum Soft Plastic Bait Mold Proudly made in the USA! 4 1/2 inch Worm Mold ( 10 cavity ) Mold makes Lures that are aprx 4 1/2 " inch in length and aprx 1/4 inch in diameter. Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 128.00 USD https://www.lakesidemolds.com/product/4-12-inch-finesse-worm-10-cavity-aluminum-soft-plastic-bait-mold https://assets.bigcartel.com/product_images/427735875/Worm+Mold+-+Pic1.webp https://assets.bigcartel.com/product_images/427735872/Worm+Mold+-+Pic2.webp,https://assets.bigcartel.com/product_images/427735869/Worm+Mold+-+Pic3.webp,https://assets.bigcartel.com/product_images/427735863/Worm+Mold+-+Pic5.webp,https://assets.bigcartel.com/product_images/427735860/Worm+Mold+-+Pic6.webp,https://assets.bigcartel.com/product_images/427735866/Worm+Mold+-+Pic4.webp 120191577 new in stock 120094398 2.5 oz Bank Sinker - 16 Cavity Proudly made in the USA! 2.5 oz ( 2 1/2 oz ) Bank Sinker 16 cavity Production Mold ( You read that right.... 16 Cavities !! ) Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/25-oz-bank-sinker-16-cavity https://assets.bigcartel.com/product_images/427406838/Bank-2.5+pic+1.webp https://assets.bigcartel.com/product_images/427406832/Bank-2.5+pic+3.webp,https://assets.bigcartel.com/product_images/427406835/Bank-2.5+pic+2.webp,https://assets.bigcartel.com/product_images/427406826/Bank-2.5+pic+5.webp,https://assets.bigcartel.com/product_images/427406829/Bank-2.5+pic+4.webp,https://assets.bigcartel.com/product_images/427406814/Bank-2.5+pic+6.webp 120094398 new in stock 120007506 1.5 oz Bank Sinker - 16 Cavity Proudly made in the USA! 1.5 oz ( 1 1/2 oz ) Bank Sinker 16 cavity Production Mold ( You read that right.... 16 Cavities !! ) Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/15-oz-bank-sinker-16-cavity https://assets.bigcartel.com/product_images/427108596/1.5+bank+pic+3.webp https://assets.bigcartel.com/product_images/427108593/1.5+bank+pic+4.webp,https://assets.bigcartel.com/product_images/427108599/1.5+bank+pic+2.webp,https://assets.bigcartel.com/product_images/427108605/1.5+bank+pic+1.webp 120007506 new in stock 119957424 2 1/2 LB ( 40 oz ) Cannon Ball Deep Drop Weight Mold ( 6 Cavity ) CNC Machined Proudly made in the USA! 2 1/2 LB ( 40 oz ) Cannon Ball ( 6 Cavity ) Deep Drop Weight Mold. Please Note: This quality mold is made with 1.75" thick aluminum plate to prevent heat warping. This will ensure years and years of use. The mold uses #3 eyelet hooks This mold has pins for the eyelet hooks to slip onto to prevent the clip from falling into the cavity while pouring. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 268.00 USD https://www.lakesidemolds.com/product/2-12-lb-40-oz-cannon-ball-deep-drop-weight-mold-6-cavity-cnc-machined https://assets.bigcartel.com/product_images/426927426/40+oz+Cannon+Ball+Pic+1.webp https://assets.bigcartel.com/product_images/426927423/40+oz+Cannon+Ball+Pic+2.webp,https://assets.bigcartel.com/product_images/426927417/40+oz+Cannon+Ball+Pic+3.webp,https://assets.bigcartel.com/product_images/426927414/40+oz+Cannon+Ball+Pic+4.webp 119957424 new in stock 119915517 6 LB ( 7 cavity ) Rock Cod Sinker Production Mold Proudly made in the USA! 7 Cavity 6 LB Cod Sinker / Deep Drop Weight Mold. Mold makes 6 LB weights. The mold uses #3 eyelet hooks Please Note: To our Alaska friends... This item will be shipped via USPS Ground Advantage. If you need this item expedited please contact us. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 328.00 USD https://www.lakesidemolds.com/product/6-lb-7-cavity-rock-cod-sinker-production-mold https://assets.bigcartel.com/product_images/426770568/6+LB+Rock+Cod+-+pic+6.webp https://assets.bigcartel.com/product_images/426770580/6+LB+Rock+Cod+-+pic+2.webp,https://assets.bigcartel.com/product_images/426770583/6+LB+Rock+Cod+-+pic+1.webp,https://assets.bigcartel.com/product_images/426770571/6+LB+Rock+Cod+-+pic+5.webp,https://assets.bigcartel.com/product_images/426770574/6+LB+Rock+Cod+-+pic+4.webp,https://assets.bigcartel.com/product_images/426770577/6+LB+Rock+Cod+-+pic+3.webp 119915517 new in stock 119870433 1/2 oz Sea Witch BULLET JIGHEAD Mold - Mahi, Wahoo, Tuna Proudly made in the USA! 1/2 oz Bullet Jighead Mold with 1/8" through hole ( 10 cavity production mold ) Mold comes with easy pull Teflon pull rods Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/12-oz-sea-witch-bullet-jighead-mold-mahi-wahoo-tuna https://assets.bigcartel.com/product_images/426617070/5Bank-pic+7.webp https://assets.bigcartel.com/product_images/426617085/Seawitch+Pic+2.webp,https://assets.bigcartel.com/product_images/426617091/Seawitch+Pic+1.webp,https://assets.bigcartel.com/product_images/426617073/Seawitch+Pic+6.webp,https://assets.bigcartel.com/product_images/426617067/5Bank-pic+8.webp,https://assets.bigcartel.com/product_images/426617079/Seawitch+Pic+4.webp,https://assets.bigcartel.com/product_images/426617076/Seawitch+Pic+5.webp,https://assets.bigcartel.com/product_images/426617082/Seawitch+Pic+3.webp 119870433 new in stock 119601837 16 oz Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 16 oz Bank Sinker 10 cavity Production Mold Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 258.00 USD https://www.lakesidemolds.com/product/16-oz-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/425698983/20260604_153952.jpg https://assets.bigcartel.com/product_images/425699007/16+oz+Bank.jpg,https://assets.bigcartel.com/product_images/425698986/20260604_153958.jpg,https://assets.bigcartel.com/product_images/425698989/20260604_154006.jpg,https://assets.bigcartel.com/product_images/425698980/20260604_153909.jpg 119601837 new in stock 119278113 5 oz Flat Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 5 oz Flat Bank Sinker 10 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/5-oz-flat-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/424624056/5Bank-pic1.webp https://assets.bigcartel.com/product_images/424624053/5Bank-pic2.webp,https://assets.bigcartel.com/product_images/424624044/5Bank-pic5.webp,https://assets.bigcartel.com/product_images/424624047/5Bank-pic4.webp,https://assets.bigcartel.com/product_images/424624041/5Bank-pic6.webp,https://assets.bigcartel.com/product_images/424624050/5Bank-pic3.webp 119278113 new in stock 119013753 Rock Hound Walleye Jig Mold ( 8 cavity ) 1 oz - ( setup for bait keeper ) Proudly made in the USA! Rock Hound 8 cavity jig Mold ( 8 cavity x 1 oz ) This mold is setup for Do-it WB-800 Wire Keeper The mold features magnets to help hold the hook and wire keepers in place prior to casting. These jigs work great for fishing heavy current and rocky bottoms. Be sure to check out this video review on YouTube: https://youtu.be/f7257X3rWlY?si=Saz-9N0ur4lavLNN The eye socks are created with 5/16" dowel pins, so 7mm or 9/32" eyes work well. This mold is setup to use Eagle Claw Pro-V Jig Hooks ( Model 500R ) Size 4/0 -Or- VMC 7150 3/0 These hooks are available from Jannsnetcraft or other online sources The item number from Jannsnetcraft is: 820102 Select Size 4/0 and then what ever color you would like This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... 178.00 USD https://www.lakesidemolds.com/product/rock-hound-walleye-jig-mold-8-cavity-1-oz-setup-for-bait-keeper https://assets.bigcartel.com/product_images/423684339/RH-BK-+Pic--1.jpg https://assets.bigcartel.com/product_images/423683523/RH-WK-+Pic+2.webp,https://assets.bigcartel.com/product_images/423683511/RH-WK-+Pic+6.webp,https://assets.bigcartel.com/product_images/423683514/RH-WK-+Pic+5.webp,https://assets.bigcartel.com/product_images/423683517/RH-WK-+Pic+4.webp,https://assets.bigcartel.com/product_images/423683520/RH-WK-+Pic+3.webp,https://assets.bigcartel.com/product_images/423683508/RH-WK-+Pic+7.webp 119013753 new in stock 118654023 Fish Net Weight Mold - Used in Gill Nets ( Lead Pipe Style ) 45 Gram (1 . 6 oz) Proudly made in the USA! Fish Net Weight Mold Aprx 1.6 oz ( just over 1 1/2 oz ) finished weight on each poured piece 4 cavities on both sides ( 8 cavity total ) Length of weight is 2.78" ( just a tad over 2 3/4" ) ( 70.60 mm ) Outside diameter of weight is .39" ( just a tad over 3/8" ) ( 9.9 mm ) 5mm through hole ( .196 " ) Mold includes (2) 5mm Teflon pull rods to create the hole in the weight during casting. The Teflon rods are heat resistant and make removal from the finished product very easy. Mold features air vents to prevent air pockets during the casting process. Mold features our very popular spring clamp system for holding the mold closed while you pour the lead. This mold is precision machined out of 6061 Aluminum, and will last for years! 178.00 USD https://www.lakesidemolds.com/product/fish-net-weight-mold-used-in-gill-nets-lead-pipe-style-45-gram-1-6-oz https://assets.bigcartel.com/product_images/422475207/FNW-Pic2.webp https://assets.bigcartel.com/product_images/422475210/FNW-Pic1.webp,https://assets.bigcartel.com/product_images/422475198/FNW-Pic5.webp,https://assets.bigcartel.com/product_images/422475195/FNW-Pic6.webp,https://assets.bigcartel.com/product_images/422475201/FNW-Pic4.webp,https://assets.bigcartel.com/product_images/422475204/FNW-Pic3.webp 118654023 new in stock 118653972 Egg Sinker Production Mold - 2 oz and 3 oz Combo Mold Proudly made in the USA! Egg Sinker Production Mold ( With Teflon Heat Resistant Pull Rods! ) 2 oz ( 7 Cavity ) 3 oz ( 6 Cavity ) This Hinged Mold includes a built in spring loaded clamp which keeps the mold tightly closed during the pouring process. The Heat Resistant Teflon pull rods pull out like running a hot knife through butter! The hole diameter is just shy of 1/8 inch The mold has vents cut in for air to escape during casting.... which ensures near perfect pours every time! This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/egg-sinker-production-mold-2-oz-and-3-oz-combo-mold https://assets.bigcartel.com/product_images/422475054/ES-Pic1.webp https://assets.bigcartel.com/product_images/422475039/ES-Pic5.webp,https://assets.bigcartel.com/product_images/422475045/ES-Pic4.webp,https://assets.bigcartel.com/product_images/422475048/ES-Pic3.webp,https://assets.bigcartel.com/product_images/422475051/ES-Pic2.webp 118653972 new in stock 118593390 1.50 oz Bell Sinker Production Mold ( 13 cavity ) 13 Cavity 1.50 oz Bell Sinker Mold The mold is set up for #1 Brass eyelets Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 168.00 USD https://www.lakesidemolds.com/product/150-oz-bell-sinker-production-mold-13-cavity https://assets.bigcartel.com/product_images/422264655/20260403_160312.jpg https://assets.bigcartel.com/product_images/422264619/20260403_160226.jpg,https://assets.bigcartel.com/product_images/422264667/20260403_160335.jpg,https://assets.bigcartel.com/product_images/422264697/20260403_160323.jpg,https://assets.bigcartel.com/product_images/422264703/20260403_160251.jpg,https://assets.bigcartel.com/product_images/422264706/20260403_160139.jpg,https://assets.bigcartel.com/product_images/422264709/20260403_155922.jpg,https://assets.bigcartel.com/product_images/422264712/20260403_155906.jpg 118593390 new in stock 118520709 4 inch Fork "JUMBO" Tail Minnow - TAIL SECTION ONLY Proudly made in the USA! Model J ( Stands for Jumbo ) 24 Cavity Fork Tail / Split Tail Minnow Mold that works with our " Model J " fork tail minnow mold. This tail was designed to be flat and very thin to add extra action in the water. We also designed this mold with one injection port so that you can inject all cavities at once. ( This mold only makes the tail section that can be placed into our Jumbo Split Tail Minnow Mold to allow you to have a different colored tails ) Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! 75.00 USD https://www.lakesidemolds.com/product/4-inch-fork-jumbo-tail-minnow-tail-section-only https://assets.bigcartel.com/product_images/422018394/JFT-TA-Pic1.webp https://assets.bigcartel.com/product_images/422018391/JFT-TA-Pic2.webp,https://assets.bigcartel.com/product_images/422018388/JFT-TA-Pic3.webp,https://assets.bigcartel.com/product_images/422018385/JFT-TA-Pic4.webp,https://assets.bigcartel.com/product_images/422018382/JFT-TA-Pic5.webp 118520709 new in stock 118520625 4 inch [JUMBO] Fork Tail Minnow ( MODEL J ) Proudly made in the USA! BRAND NEW! "JUMBO" 10 Cavity Fork Tail / Split Tail Minnow Mold Mold Model: J ( stands for Jumbo ) This new model is similar to our original Fork Tail Minnow, but we increased the diameter of the body, and we also made the tails thin and flat to add extra action in the water. We have added a drawing to our pictures showing the difference between our original and the new Jumbo version. This new jumbo version works great with the larger jig heads because the larger diameter will prevent the plastic from splitting. Mold makes Lures that are aprx 4 inch in length We sell a separate mold that has just the tail sections, this allows you to make different colored tails like what is shown in our main photo for this item. Simply insert this tail into this mold and then inject like normal and the two sections will bond together for an unbelievable presentation the fish won't be able to resist! Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 120.00 USD https://www.lakesidemolds.com/product/4-inch-jumbo-fork-tail-minnow-model-j https://assets.bigcartel.com/product_images/422018199/JFT-Pic1.webp https://assets.bigcartel.com/product_images/422018196/JFT-Pic2.webp,https://assets.bigcartel.com/product_images/422018178/JFT-Pic8.webp,https://assets.bigcartel.com/product_images/422018193/JFT-Pic3.webp,https://assets.bigcartel.com/product_images/422018181/JFT-Pic7.webp,https://assets.bigcartel.com/product_images/422018184/JFT-Pic6.webp,https://assets.bigcartel.com/product_images/422018187/JFT-Pic5.webp,https://assets.bigcartel.com/product_images/422018190/JFT-Pic4.webp 118520625 new in stock 117917184 3/8 oz Mullet Jig head Mold -Spotted Seatrout, Flounder, Puppy Drum Proudly made in the USA! 3/8 oz Mullet Jig head Mold ( 6 Cavity ) Spotted Seatrout, Speckled Sea Trout, Flounder, Puppy Drum, Blackfin Tuna These jigs use Mustad 32786 4/0 hooks Sizes The ribbed shank on this jig was specifcally designed and tested for use with plastics to help prevent the plastics from splitting. The finished eye socket is just under 3/8" ( So any eye size less than 3/8" will fit ) This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 168.00 USD https://www.lakesidemolds.com/product/38-oz-mullet-jig-head-mold-spotted-seatrout-flounder-puppy-drum https://assets.bigcartel.com/product_images/419765418/mm.375+pic+5.webp https://assets.bigcartel.com/product_images/419765430/mm.375+pic+2.webp,https://assets.bigcartel.com/product_images/419765433/mm.375+pic+1.webp,https://assets.bigcartel.com/product_images/419765427/mm.375+pic+3.webp,https://assets.bigcartel.com/product_images/419765424/mm.375+pic+4.webp 117917184 new in stock 117917133 Mullet Jig head Mold -Spotted Seatrout, Flounder, Puppy Drum , 1/4 oz Proudly made in the USA! 1/4 oz Mullet Jig head Mold ( 6 Cavity ) Spotted Seatrout, Speckled Sea Trout, Flounder, Puppy Drum, Blackfin Tuna These jigs use Mustad 32786 4/0 hooks Sizes The ribbed shank on this jig was specifcally designed and tested for use with plastics to help prevent the plastics from splitting. The finished eye socket is just under 3/8" ( So any eye size less than 3/8" will fit ) This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 168.00 USD https://www.lakesidemolds.com/product/mullet-jig-head-mold-spotted-seatrout-flounder-puppy-drum-14-oz https://assets.bigcartel.com/product_images/419765076/mm.25+pic+1.webp https://assets.bigcartel.com/product_images/419765061/mm.25+pic+6.webp,https://assets.bigcartel.com/product_images/419765064/mm.25+pic+5.webp,https://assets.bigcartel.com/product_images/419765067/mm.25+pic+4.webp,https://assets.bigcartel.com/product_images/419765070/mm.25+pic+3.webp,https://assets.bigcartel.com/product_images/419765073/mm.25+pic+2.webp 117917133 new in stock 117861651 20 oz Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 20 oz Bank Sinker 10 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. Please Note: in some of the photos the finish is slightly blurred making the finish of the metal look distorted. This was caused by the camera and poor lighting. ( The actual finish on the mold is very high quality ) This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 268.00 USD https://www.lakesidemolds.com/product/20-oz-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/419543262/Bank-20-Pic+1.webp https://assets.bigcartel.com/product_images/419543238/Bank-20-Pic+8.webp,https://assets.bigcartel.com/product_images/419543244/Bank-20-Pic+7.webp,https://assets.bigcartel.com/product_images/419543247/Bank-20-Pic+6.webp,https://assets.bigcartel.com/product_images/419543250/Bank-20-Pic+5.webp,https://assets.bigcartel.com/product_images/419543253/Bank-20-Pic+4.webp,https://assets.bigcartel.com/product_images/419543256/Bank-20-Pic+3.webp,https://assets.bigcartel.com/product_images/419543259/Bank-20-Pic+2.webp 117861651 new in stock 117783864 Rock Hound 8 cavity jig Mold ( 4 cavity x 1.25 oz ) ( 4 cavity x 1.50 oz ) Proudly made in the USA! Rock Hound 8 cavity jig Mold ( 4 cavity x 1.25 oz ) ( 4 cavity x 1.50 oz ) Mold Model: RH-1.25-1.50-COMBO These jigs work great for fishing heavy current and rocky bottoms. Be sure to check out this video review on YouTube: https://youtu.be/f7257X3rWlY?si=Saz-9N0ur4lavLNN The eye socks are created with 5/16" dowel pins, so #7 eyes work well. This mold is setup to use ( see pictures for examples of hook laying in mold ) 1.25 oz Cavity: Eagle Claw Pro-V Jig Hooks ( Model 500R ) Size 4/0 -Or- VMC 7150 3/0 1.50 oz Cavity: VMC 7150 4/0 ( VMC 7150 3/0 optional ) These hooks are available from Jannsnetcraft or Barlows and other online sources The item number from Jannsnetcraft is: 820102 Select Size 4/0 and then what ever color you would like This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 178.00 USD https://www.lakesidemolds.com/product/rock-hound-8-cavity-jig-mold-4-cavity-x-125-oz-4-cavity-x-150-oz https://assets.bigcartel.com/product_images/419255757/RH-pic1.webp https://assets.bigcartel.com/product_images/419255754/RH-pic2.webp,https://assets.bigcartel.com/product_images/419255751/RH-pic3.webp,https://assets.bigcartel.com/product_images/419255736/RH-pic8.webp,https://assets.bigcartel.com/product_images/419255739/RH-pic7.webp,https://assets.bigcartel.com/product_images/419255742/RH-pic6.webp,https://assets.bigcartel.com/product_images/419255745/RH-pic5.webp,https://assets.bigcartel.com/product_images/419255748/RH-pic4.webp 117783864 new in stock 117692505 1 oz Bank Sinker - 16 Cavity Proudly made in the USA! 1 oz Bank Sinker 16 cavity Production Mold ( You read that right.... 16 Cavities !! ) Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/1-oz-bank-sinker-16-cavity https://assets.bigcartel.com/product_images/418905063/BS-1oz-pic1.webp https://assets.bigcartel.com/product_images/418905057/BS-1oz-pic3.webp,https://assets.bigcartel.com/product_images/418905051/BS-1oz-pic5.webp,https://assets.bigcartel.com/product_images/418905048/BS-1oz-pic6.webp,https://assets.bigcartel.com/product_images/418905054/BS-1oz-pic4.webp,https://assets.bigcartel.com/product_images/418905060/BS-1oz-pic2.webp 117692505 new in stock 117572244 4 LB ( 8 cavity ) Rock Cod Sinker Production Mold Proudly made in the USA! 8 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes 4 LB weights. The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/4-lb-8-cavity-rock-cod-sinker-production-mold https://assets.bigcartel.com/product_images/418462932/RC4+-+Pic1.webp https://assets.bigcartel.com/product_images/418462929/RC4+-+Pic2.webp,https://assets.bigcartel.com/product_images/418462914/RC4+-+Pic6.webp,https://assets.bigcartel.com/product_images/418462920/RC4+-+Pic5.webp,https://assets.bigcartel.com/product_images/418462923/RC4+-+Pic4.webp 117572244 new in stock 117484545 Bottom Bouncer Weight Mold - 4 oz, 5 oz, 6 oz Proudly made in the USA! Bottom Bouncer Weight Mold - 3 Cavity ( 4 oz, 5 oz, 6 oz ) This mold is setup for to accept wires diameter from .04 to .067 ( Please note, on the smaller diameter wire you may see a very small amount of leakage at the end of the weight, but nothing significant ) This mold features inline magnets that will help hold the wire in place during casting ( may not work with non-magnetic stainless steel ) Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 128.00 USD https://www.lakesidemolds.com/product/bottom-bouncer-weight-mold-4-oz-5-oz-6-oz https://assets.bigcartel.com/product_images/418168665/BB-pic1.webp https://assets.bigcartel.com/product_images/418168647/BB-pic7.webp,https://assets.bigcartel.com/product_images/418168650/BB-pic6.webp,https://assets.bigcartel.com/product_images/418168653/BB-pic5.webp,https://assets.bigcartel.com/product_images/418168656/BB-pic4.webp,https://assets.bigcartel.com/product_images/418168659/BB-pic3.webp,https://assets.bigcartel.com/product_images/418168662/BB-pic2.webp 117484545 new in stock 115976808 6 oz Pyramid Sinker Production Mold ( 14 cavity ) Aluminum CNC Proudly made in the USA! 14 Cavity 6 oz Pyramid Sinker Mold The mold is set up for #2 Eyelet Clips / Hooks Please Note: The mold was cold when we poured the weight for this photo, so that is the reason for the wavy pattern on the sample weight... Once the mold warms up the finished product will be smooth Spru is designed for easy cutting or breaking off from the weight. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 288.00 USD https://www.lakesidemolds.com/product/6-oz-pyramid-sinker-production-mold-14-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/413087103/Pyramid+-+6+-+Pic+1.webp https://assets.bigcartel.com/product_images/413087100/Pyramid+-+6+-+Pic+2.webp,https://assets.bigcartel.com/product_images/413087097/Pyramid+-+6+-+Pic+3.webp,https://assets.bigcartel.com/product_images/413087094/Pyramid+-+6+-+Pic+4.webp,https://assets.bigcartel.com/product_images/413087085/Pyramid+-+6+-+Pic+7.webp,https://assets.bigcartel.com/product_images/413087091/Pyramid+-+6+-+Pic+5.webp,https://assets.bigcartel.com/product_images/413087088/Pyramid+-+6+-+Pic+6.webp 115976808 new in stock 115945755 5 oz Pyramid Sinker Production Mold ( 14 cavity ) Aluminum CNC Proudly made in the USA! 14 Cavity 5 oz Pyramid Sinker Mold The mold is set up for #2 Eyelet Clips / Hooks Spru is designed for easy cutting or breaking off from the weight. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 288.00 USD https://www.lakesidemolds.com/product/5-oz-pyramid-sinker-production-mold-14-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/412977696/Pyramid+-+5+-+Pic+1.webp https://assets.bigcartel.com/product_images/412977693/Pyramid+-+5+-+Pic+2.webp,https://assets.bigcartel.com/product_images/412977690/Pyramid+-+5+-+Pic+3.webp,https://assets.bigcartel.com/product_images/412977687/Pyramid+-+5+-+Pic+4.webp,https://assets.bigcartel.com/product_images/412977678/Pyramid+-+5+-+Pic+7.webp,https://assets.bigcartel.com/product_images/412977681/Pyramid+-+5+-+Pic+6.webp,https://assets.bigcartel.com/product_images/412977684/Pyramid+-+5+-+Pic+5.webp 115945755 new in stock 115786107 4 oz Pyramid Sinker Production Mold ( 12 cavity ) Aluminum CNC Proudly made in the USA! 12 Cavity 4 oz Pyramid Sinker Mold The mold is set up for #2 Eyelet Clips / Hooks Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. Mold has spring loaded clamp to allow pouring without having to hold the mold closed. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 238.00 USD https://www.lakesidemolds.com/product/4-oz-pyramid-sinker-production-mold-12-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/412446270/4+oz+Pyramid+-+Pic+3.webp https://assets.bigcartel.com/product_images/412446273/4+oz+Pyramid+-+Pic+2.webp,https://assets.bigcartel.com/product_images/412446276/4+oz+Pyramid+-+Pic+1.webp 115786107 new in stock 115608858 6 oz Flat Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 6 oz Flat Bank Sinker 10 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/6-oz-flat-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/411843249/Flat+Bank+6+oz+-+Pic+1.webp https://assets.bigcartel.com/product_images/411843246/Flat+Bank+6+oz+-+Pic+2.webp,https://assets.bigcartel.com/product_images/411843240/Flat+Bank+6+oz+-+Pic+3.webp,https://assets.bigcartel.com/product_images/411843243/Flat+Bank+6+oz+-+Pic+4.webp,https://assets.bigcartel.com/product_images/411843237/Flat+Bank+6+oz+-+Pic+5.webp 115608858 new in stock 115608567 1 oz Flat Bank Sinker 20 Cavity Production Mold Proudly made in the USA! 1 oz Flat Bank Sinker 20 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/1-oz-flat-bank-sinker-20-cavity-production-mold https://assets.bigcartel.com/product_images/411842157/Flat+Bank+1+oz+-+Pic+3.webp https://assets.bigcartel.com/product_images/411842160/Flat+Bank+1+oz+-+Pic+1.webp,https://assets.bigcartel.com/product_images/411842163/Flat+Bank+1+oz+-+Pic+2.webp,https://assets.bigcartel.com/product_images/411842154/Flat+Bank+1+oz+-+Pic+4.webp,https://assets.bigcartel.com/product_images/411842151/Flat+Bank+1+oz+-+Pic+5.webp 115608567 new in stock 115608474 1-1/2 oz Flat Bank Sinker 18 Cavity Production Mold Proudly made in the USA! 1.50 oz Flat Bank Sinker 18 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/1-12-oz-flat-bank-sinker-18-cavity-production-mold https://assets.bigcartel.com/product_images/411841896/Flat+Bank+1.50+oz+-+Pic+1.webp https://assets.bigcartel.com/product_images/411841893/Flat+Bank+1.50+oz+-+Pic+2.webp,https://assets.bigcartel.com/product_images/411841890/Flat+Bank+1.50+oz+-+Pic+3.webp,https://assets.bigcartel.com/product_images/411841887/Flat+Bank+1.50+oz+-+Pic+4.webp,https://assets.bigcartel.com/product_images/411841884/Flat+Bank+1.50+oz+-+Pic+5.webp 115608474 new in stock 115608402 2 oz Flat Bank Sinker 16 Cavity Production Mold Proudly made in the USA! 2 oz Flat Bank Sinker 16 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/2-oz-flat-bank-sinker-16-cavity-production-mold https://assets.bigcartel.com/product_images/411841626/Flat+Bank+2+oz+-+Pic+1.webp https://assets.bigcartel.com/product_images/411841623/Flat+Bank+2+oz+-+Pic+2.webp,https://assets.bigcartel.com/product_images/411841620/Flat+Bank+2+oz+-+Pic+3.webp,https://assets.bigcartel.com/product_images/411841617/Flat+Bank+2+oz+-+Pic+4.webp,https://assets.bigcartel.com/product_images/411841614/Flat+Bank+2+oz+-+Pic+5.webp 115608402 new in stock 115608303 3 oz Flat Bank Sinker 12 Cavity Production Mold Proudly made in the USA! 3 oz Flat Bank Sinker 12 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/3-oz-flat-bank-sinker-12-cavity-production-mold https://assets.bigcartel.com/product_images/411841206/Flat+Bank+3+oz+-+Pic+1.webp https://assets.bigcartel.com/product_images/411841203/Flat+Bank+3+oz+-+Pic+2.webp,https://assets.bigcartel.com/product_images/411841197/Flat+Bank+3+oz+-+Pic+3.webp,https://assets.bigcartel.com/product_images/411841200/Flat+Bank+3+oz+-+Pic+4.webp,https://assets.bigcartel.com/product_images/411841194/Flat+Bank+3+oz+-+Pic+5.webp 115608303 new in stock 115368555 HIGH SPEED INLINE TROLLING SINKER/CIGAR TROLLING - 16 oz and 32 oz Combo Mold Proudly made in the USA! 16 oz & 32 oz High Speed Trolling Weight Mold - 4 cavity Mold Dimensions: 14.75" long x 6" tall x 2" thick with both plates Setup to work with large snap swivels ( See Pictures ) It is not necessary to use snap swivels on both ends, an other option is to use a regular swivel on one end. Mold is setup to use #3 brass eyelet clips ( Do-it Brand is recommended ) Mold includes spring loaded clamp to hold mold closed during casting process. The Sprue is designed for a clean break Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 228.00 USD https://www.lakesidemolds.com/product/high-speed-inline-trolling-sinkercigar-trolling-16-oz-and-32-oz-combo-mold https://assets.bigcartel.com/product_images/411021549/HSTW1-2-+Pic+1.webp https://assets.bigcartel.com/product_images/411021546/HSTW1-2-+Pic+2.webp,https://assets.bigcartel.com/product_images/411021543/HSTW1-2-+Pic+3.webp,https://assets.bigcartel.com/product_images/411021540/HSTW1-2-+Pic+4.webp,https://assets.bigcartel.com/product_images/411021537/HSTW1-2-+Pic+5.webp,https://assets.bigcartel.com/product_images/411021534/HSTW1-2-+Pic+6.webp,https://assets.bigcartel.com/product_images/411021531/HSTW1-2-+Pic+7.webp 115368555 new in stock 115358388 BULLET TUNA JIGHEAD Mold - 1 oz / 2 oz / 3 oz Combo Mold ( 5 Cavity Total ) Proudly made in the USA! Bullet Jighead Mold with through hole Mold configuration: 1 oz x 1 Cavity ( Has 1/4" hole ) See Drawing Picture 2 oz x 2 Cavity ( Has 1/4" hole ) See Drawing Picture 3 oz x 2 Cavity ( Has 3/8" hole ) See Drawing Picture Mold comes with easy pull Teflon pull rods Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 238.00 USD https://www.lakesidemolds.com/product/bullet-tuna-jighead-mold-1-oz-2-oz-3-oz-combo-mold-5-cavity-total https://assets.bigcartel.com/product_images/410988291/Bullet+-+1-2-3+combo+-+pic+1.webp https://assets.bigcartel.com/product_images/410988285/Bullet+-+1-2-3+combo+-+pic+2.webp,https://assets.bigcartel.com/product_images/410988282/Bullet+-+1-2-3+combo+-+pic+3.webp,https://assets.bigcartel.com/product_images/410988279/Bullet+-+1-2-3+combo+-+pic+5.webp,https://assets.bigcartel.com/product_images/410988276/Bullet+-+1-2-3+combo+-+pic+6.webp,https://assets.bigcartel.com/product_images/410988288/Bullet+-+1-2-3+combo+-+pic+4.webp 115358388 new in stock 115210479 drop shot LEECH Mold - 3.25 inch - Ned Leech mold - leach mold Proudly made in the USA! 10 Cavity Fresh Water Leech Mold Mold makes Lures that are aprx 3.25 inch in length Bottom Side has a hook slot cutout ( See photos ) Bottom side also has suction cup similar to a live leech. Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 128.00 USD https://www.lakesidemolds.com/product/325-inch-leech-aluminum-injection-bait-mold https://assets.bigcartel.com/product_images/410509059/Leach-Pic1.webp https://assets.bigcartel.com/product_images/410509056/Leach-Pic2.webp,https://assets.bigcartel.com/product_images/410509053/Leach-Pic3.webp,https://assets.bigcartel.com/product_images/410509050/Leach-Pic4.webp,https://assets.bigcartel.com/product_images/410509047/Leach-Pic5.webp,https://assets.bigcartel.com/product_images/410509038/Leach-Pic8.webp,https://assets.bigcartel.com/product_images/410509041/Leach-Pic7.webp,https://assets.bigcartel.com/product_images/410509044/Leach-Pic6.webp 115210479 new in stock 115084845 Deep Drop Weight Mold ( 2 Cavity ) 15# and 15# Aluminum CNC Proudly made in the USA! 2 Cavity Deep Drop Weight Mold. Please Note: The photo in this ad is from our 7 LB version, but the mold you will receive will be the 15 LB Mold makes (2) 15 LB weights. The weights have a diameter of 1.50" ( 1 1/2" ) so they will fit into a standard rod holder! The length of the weight will be approx 22.50 " long The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 268.00 USD https://www.lakesidemolds.com/product/deep-drop-weight-mold-2-cavity-15-and-15-aluminum-cnc https://assets.bigcartel.com/product_images/410085567/15+LB+Deep+Pic+1.webp https://assets.bigcartel.com/product_images/410085564/15+LB+Deep+Pic+2.webp,https://assets.bigcartel.com/product_images/410085561/15+LB+Deep+Pic+3.webp,https://assets.bigcartel.com/product_images/410085558/15+LB+Deep+Pic+4.webp 115084845 new in stock 114918504 5 oz and 6 oz Combo Pyramid Sinker Production Mold ( 14 cavity ) Aluminum CNC Proudly made in the USA! 14 Cavity 5 oz and 6 oz Pyramid Sinker Mold 7 Cavities of both sizes The mold is set up for #2 Eyelet Clips / Hooks Spru is designed for easy cutting or breaking off from the weight. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 288.00 USD https://www.lakesidemolds.com/product/5-oz-and-6-oz-combo-pyramid-sinker-production-mold-14-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/409510209/5+and+6+oz+Pyramid+Pic+1.webp https://assets.bigcartel.com/product_images/409510206/5+and+6+oz+Pyramid+Pic+2.webp,https://assets.bigcartel.com/product_images/409510203/5+and+6+oz+Pyramid+Pic+3.webp,https://assets.bigcartel.com/product_images/409510197/5+and+6+oz+Pyramid+Pic+4.webp,https://assets.bigcartel.com/product_images/409510200/5+and+6+oz+Pyramid+Pic+5.webp 114918504 new in stock 114918393 1 oz Pyramid Sinker Production Mold ( 20 cavity ) Aluminum CNC Proudly made in the USA! 20 Cavity 1 oz Pyramid Sinker Mold The mold is set up for #1 Eyelet Clips / Hooks Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. Mold has spring loaded clamp to allow pouring without having to hold the mold closed. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 288.00 USD https://www.lakesidemolds.com/product/1-oz-pyramid-sinker-production-mold-20-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/409509819/1+oz+Pyramid+Pic+1.webp https://assets.bigcartel.com/product_images/409509816/1+oz+Pyramid+Pic+2.webp,https://assets.bigcartel.com/product_images/409509813/1+oz+Pyramid+Pic+3.webp,https://assets.bigcartel.com/product_images/409509807/1+oz+Pyramid+Pic+4.webp,https://assets.bigcartel.com/product_images/409509804/1+oz+Pyramid+Pic+5.webp,https://assets.bigcartel.com/product_images/409509810/1+oz+Pyramid+Pic+6.webp 114918393 new in stock 114716067 Deep Drop Weight Mold 2 LB ( 6 Cavity ) Aluminum CNC Proudly made in the USA! Please note: We will be adding additional photos of the actual mold, but in general this mold is set up like all the rest of our spring loaded molds we sell on ebay. We have had several requests for this mold so we wanted to get it listed as quick as possible... so thats why we don't have the all of the photos 6 Cavity 2 LB Cod Sinker / Deep Drop Weight Mold. Mold makes (6) x 2 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 218.00 USD https://www.lakesidemolds.com/product/deep-drop-weight-mold-2-lb-6-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/408814911/2+LB+Deep+Drop+Pic+1.webp https://assets.bigcartel.com/product_images/408814908/2+LB+Deep+Drop+Pic+2.webp,https://assets.bigcartel.com/product_images/408814905/2+LB+Deep+Drop+Pic+3.webp,https://assets.bigcartel.com/product_images/408814902/2+LB+Deep+Drop+Pic+4.webp,https://assets.bigcartel.com/product_images/408814899/2+LB+Deep+Drop+Pic+5.webp 114716067 new in stock 114381870 5 LB Cannon Ball Deep Drop Weight Mold ( 5 Cavity ) CNC Machined Proudly made in the USA! 5 LB Cannon Ball ( 5 Cavity ) Deep Drop Weight Mold. Mold makes 5 LB weights. Please Note: This quality mold is made with 2" thick aluminum plate to prevent heat warping. This will ensure years and years of use. The mold uses #3 eyelet hooks This mold has pins for the eyelet hooks to slip onto to prevent the clip from falling into the cavity while pouring. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 278.00 USD https://www.lakesidemolds.com/product/5-lb-cannon-ball-deep-drop-weight-mold-5-cavity-cnc-machined https://assets.bigcartel.com/product_images/407710539/5+LB+cannon+Ball+Pic+1.webp https://assets.bigcartel.com/product_images/407710536/5+LB+cannon+Ball+Pic+2.webp,https://assets.bigcartel.com/product_images/407710533/5+LB+cannon+Ball+Pic+3.webp,https://assets.bigcartel.com/product_images/407710530/5+LB+cannon+Ball+Pic+4.webp,https://assets.bigcartel.com/product_images/407710524/5+LB+cannon+Ball+Pic+6.webp,https://assets.bigcartel.com/product_images/407710527/5+LB+cannon+Ball+Pic+5.webp 114381870 new in stock 114339279 1 LB Cannon Ball Deep Drop Weight Mold ( 8 Cavity ) CNC Machined Proudly made in the USA! 1 LB Cannon Ball ( 8 Cavity ) Deep Drop Weight Mold. The mold uses #3 eyelet hooks This mold has pins for the eyelet hooks to slip onto to prevent the clip from falling into the cavity while pouring. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 238.00 USD https://www.lakesidemolds.com/product/1-lb-cannon-ball-deep-drop-weight-mold-8-cavity-cnc-machined https://assets.bigcartel.com/product_images/407563137/1+LB+cannon+Ball+Pic+1.webp https://assets.bigcartel.com/product_images/407563134/1+LB+cannon+Ball+Pic+2.webp,https://assets.bigcartel.com/product_images/407563131/1+LB+cannon+Ball+Pic+3.webp,https://assets.bigcartel.com/product_images/407563128/1+LB+cannon+Ball+Pic+4.webp,https://assets.bigcartel.com/product_images/407563125/1+LB+cannon+Ball+Pic+5.webp,https://assets.bigcartel.com/product_images/407563122/1+LB+cannon+Ball+Pic+6.webp 114339279 new in stock 114322140 4 LB Cannon Ball Deep Drop Weight Mold ( 5 Cavity ) CNC Machined Proudly made in the USA! 4 LB Cannon Ball ( 5 Cavity ) Deep Drop Weight Mold. Mold makes 4 LB weights. Please Note: This quality mold is made with 2" thick aluminum plate to prevent heat warping. This will ensure years and years of use. The mold uses #3 eyelet hooks This mold has pins for the eyelet hooks to slip onto to prevent the clip from falling into the cavity while pouring. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 268.00 USD https://www.lakesidemolds.com/product/4-lb-cannon-ball-deep-drop-weight-mold-5-cavity-cnc-machined https://assets.bigcartel.com/product_images/407505294/4+LB+Cannon+-+Pic+6.webp https://assets.bigcartel.com/product_images/407505297/4+LB+Cannon+-+Pic+5.webp,https://assets.bigcartel.com/product_images/407505300/4+LB+Cannon+-+Pic+4.webp,https://assets.bigcartel.com/product_images/407505303/4+LB+Cannon+-+Pic+3.webp,https://assets.bigcartel.com/product_images/407505306/4+LB+Cannon+-+Pic+2.webp,https://assets.bigcartel.com/product_images/407505309/4+LB+Cannon+-+Pic+1.webp 114322140 new in stock 114228459 10 oz Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 10 oz Bank Sinker 10 cavity Production Mold Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 258.00 USD https://www.lakesidemolds.com/product/10-oz-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/407176494/10+oz+Bank+-+Pic+1.webp https://assets.bigcartel.com/product_images/407176491/10+oz+Bank+-+Pic+2.webp,https://assets.bigcartel.com/product_images/407176497/10+oz+Bank+-+Pic+3.webp,https://assets.bigcartel.com/product_images/407176488/10+oz+Bank+-+Pic+4.webp,https://assets.bigcartel.com/product_images/407176485/10+oz+Bank+-+Pic+5.webp 114228459 new in stock 114228417 8 oz Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 8 oz Bank Sinker 10 cavity Production Mold Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 258.00 USD https://www.lakesidemolds.com/product/8-oz-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/407560371/8+oz+bank+-+pic+A1.webp https://assets.bigcartel.com/product_images/407560368/8+oz+bank+-+pic+A2.webp,https://assets.bigcartel.com/product_images/407560356/8+oz+bank+-+pic+A6.webp,https://assets.bigcartel.com/product_images/407560359/8+oz+bank+-+pic+A5.webp,https://assets.bigcartel.com/product_images/407560362/8+oz+bank+-+pic+A4.webp,https://assets.bigcartel.com/product_images/407560365/8+oz+bank+-+pic+A3.webp 114228417 new in stock 114228075 6 oz Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 6 oz Bank Sinker 10 cavity Production Mold Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/6-oz-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/407175519/6+oz+Bank+-+Pic+1.webp https://assets.bigcartel.com/product_images/407175516/6+oz+Bank+-+Pic+2.webp,https://assets.bigcartel.com/product_images/407175507/6+oz+Bank+-+Pic+3.webp,https://assets.bigcartel.com/product_images/407175513/6+oz+Bank+-+Pic+4.webp,https://assets.bigcartel.com/product_images/407175510/6+oz+Bank+-+Pic+5.webp 114228075 new in stock 114227895 5 oz Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 5 oz Bank Sinker 10 cavity Production Mold Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 238.00 USD https://www.lakesidemolds.com/product/5-oz-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/407495211/5+oz+Bank+-+Pic+4.webp https://assets.bigcartel.com/product_images/407495220/5+oz+Bank+-+Pic+1.webp,https://assets.bigcartel.com/product_images/407495217/5+oz+Bank+-+Pic+2.webp,https://assets.bigcartel.com/product_images/407495208/5+oz+Bank+-+Pic+5.webp,https://assets.bigcartel.com/product_images/407495214/5+oz+Bank+-+Pic+3.webp 114227895 new in stock 114226392 5 oz and 6 oz Bank Sinker -Combo- Production Mold Proudly made in the USA! 5 oz and 6 oz COMBO Bank Sinker Production Mold ( 5 Cavities of each size ) Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/5-oz-and-6-oz-bank-sinker-combo-production-mold https://assets.bigcartel.com/product_images/407170209/5-6+oz+bank+pic+3.webp https://assets.bigcartel.com/product_images/407170197/5-6+oz+bank+pic+5.webp,https://assets.bigcartel.com/product_images/407170200/5-6+oz+bank+pic+4.webp,https://assets.bigcartel.com/product_images/407170203/5-6+oz+bank+pic+2.webp,https://assets.bigcartel.com/product_images/407170206/5-6+oz+bank+pic+1.webp 114226392 new in stock 114225615 3 LB x 2 Cavity Deep Drop Weight Mold 2 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes (2) 3 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 165.00 USD https://www.lakesidemolds.com/product/3-lb-x-2-cavity-deep-drop-weight-mold https://assets.bigcartel.com/product_images/407167020/3+LB+Deep+Drop+Pic+1.webp https://assets.bigcartel.com/product_images/407167017/3+LB+Deep+Drop+Pic+2.webp,https://assets.bigcartel.com/product_images/407167014/3+LB+Deep+Drop+Pic+3.webp 114225615 new in stock 114157683 3 oz Bell Sinker Mold - ( Setup for #2 Eyes ) Aluminum CNC Proudly made in the USA! 10 Cavity 3 oz Bell Sinker Mold The mold is set up for #2 Brass Eyes Hinged mold with easy grip handles. Mold has built in spring loaded clamp to hold mold closed while pouring lead! The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 168.00 USD https://www.lakesidemolds.com/product/3-oz-bell-sinker-mold-setup-for-2-eyes-aluminum-cnc https://assets.bigcartel.com/product_images/406927956/Bell+3.webp https://assets.bigcartel.com/product_images/406927965/Bell+2.webp,https://assets.bigcartel.com/product_images/406927950/Bell+4.webp,https://assets.bigcartel.com/product_images/406927953/Bell+6.webp,https://assets.bigcartel.com/product_images/406927959/Bell+5.webp,https://assets.bigcartel.com/product_images/406927962/Bell+1.webp 114157683 new in stock 113850642 3 LB (8 cavity) Cod Sinker Production Mold Proudly made in the USA! 8 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes 3 LB weights. The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 238.00 USD https://www.lakesidemolds.com/product/8-cavity-3-lb-cod-sinker-production-mold https://assets.bigcartel.com/product_images/405888027/CS3-1.webp https://assets.bigcartel.com/product_images/405888024/CS3-2.webp,https://assets.bigcartel.com/product_images/405888021/CS3-3.webp,https://assets.bigcartel.com/product_images/405888018/CS3-4.webp,https://assets.bigcartel.com/product_images/405888015/CS3-5.webp 113850642 new in stock 113804253 Salt Water Squid Jig Mold - 2 oz ( 5 cavity ) Proudly made in the USA! 2 oz Salt Water Squid Jig Mold ( 5 Cavity ) We use a 5/16" dowel pin to create the eye socket, so we recommend a 7 mm eye Designed to be used with a Mustad 32824 9/0 or 10/0 hook Mold has been precision machined out of 6061 Aluminum. The mold features (3) spring loaded clamps which hold the two mold plates tightly together without the need for separate clamp..... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 228.00 USD https://www.lakesidemolds.com/product/salt-water-squid-jig-mold-2-oz-5-cavity https://assets.bigcartel.com/product_images/405731382/SQ1.webp https://assets.bigcartel.com/product_images/405731379/SQ2.webp,https://assets.bigcartel.com/product_images/405731376/SQ3.webp,https://assets.bigcartel.com/product_images/405731373/SQ4.webp,https://assets.bigcartel.com/product_images/405731370/SQ5.webp 113804253 new in stock 113785917 24 oz Bank Sinker 9 Cavity Production Mold Proudly made in the USA! 24 oz Bank Sinker 9 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. Please Note: in some of the photos the finish is slightly blurred making the finish of the metal look distorted. This was caused by the camera and poor lighting. ( The actual finish on the mold is very high quality ) This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 268.00 USD https://www.lakesidemolds.com/product/24-oz-bank-sinker-9-cavity-production-mold https://assets.bigcartel.com/product_images/405671958/24-1.webp https://assets.bigcartel.com/product_images/405671952/24-3.webp,https://assets.bigcartel.com/product_images/405671955/24-2.webp,https://assets.bigcartel.com/product_images/405671946/24-5.webp,https://assets.bigcartel.com/product_images/405671949/24-4.webp 113785917 new in stock 113785878 34 oz Bank Sinker 8 Cavity Production Mold Proudly made in the USA! 34 oz Bank Sinker 8 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. Please Note: in some of the photos the finish is slightly blurred making the finish of the metal look distorted. This was caused by the camera and poor lighting. ( The actual finish on the mold is very high quality ) This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 288.00 USD https://www.lakesidemolds.com/product/34-oz-bank-sinker-8-cavity-production-mold https://assets.bigcartel.com/product_images/405671835/34-6.webp https://assets.bigcartel.com/product_images/405671841/34-5.webp,https://assets.bigcartel.com/product_images/405671844/34-3.webp,https://assets.bigcartel.com/product_images/405671838/34-2.webp,https://assets.bigcartel.com/product_images/405671847/34-1.webp 113785878 new in stock 113418978 Cobia Knucklehead Jighead Mold similar to Ding-a-Ling Jighead - 2 oz - 5 Cavity Proudly made in the USA! Cobia Knucklehead Jighead Sizes: (5 Cavity x 2 oz ) Please Note: The weights above do not include the weight of the hook, so with the hook included the final weights will be aprx 2.25 oz Hook Type: (Gamakatsu 13019 9/0) -or- (Mustad 3407DT 9/0) #2 Brass Eye Clip Species this jig targets: Cobia, Stripers, Fluke, Cod, Tuna, Bull Reds, Red Fish, Striped Bass, Grouper, Snook, Ling, Lemonfish This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. Ding A Ling 168.00 USD https://www.lakesidemolds.com/product/cobia-knucklehead-jighead-mold-similar-to-ding-a-ling-jighead-2-oz-5-cavity https://assets.bigcartel.com/product_images/404440560/K1.webp https://assets.bigcartel.com/product_images/404440557/K2.webp,https://assets.bigcartel.com/product_images/404440554/K3.webp,https://assets.bigcartel.com/product_images/404440551/K4.webp,https://assets.bigcartel.com/product_images/404440548/K5.webp,https://assets.bigcartel.com/product_images/404440545/K6.webp 113418978 new in stock 113177826 Pencil Bottom Bouncer Weight Mold - 3 oz Proudly made in the USA! Pencil Bottom Bouncer Weight Mold - 2 Cavity ( 3 oz ) Setup for .040" O.D. Wire Mold has extra slot on both ends for the option of laying in a swivel or other attachment Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... 88.00 USD https://www.lakesidemolds.com/product/pencil-bottom-bouncer-weight-mold-3-oz https://assets.bigcartel.com/product_images/403621872/Pencil+1.webp https://assets.bigcartel.com/product_images/403621869/Pencil+2.webp,https://assets.bigcartel.com/product_images/403621863/Pencil+4.webp,https://assets.bigcartel.com/product_images/403621866/Pencil+3.webp,https://assets.bigcartel.com/product_images/403622664/Pencil+Wt.jpg 113177826 new in stock 113016342 2 oz Pyramid Sinker Production Mold ( 17 cavity ) Aluminum CNC Proudly made in the USA! 17 Cavity 2 oz Pyramid Sinker Mold The mold is set up for #2 Eyelet Clips / Hooks Hinged mold with easy grip handles, plus a spring clamp which eliminates the need to manually hold pressure during the casting process. Simply load all of your eyelet clips, and close the mold and engage the spring clamp to keep the mold securely closed! Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 288.00 USD https://www.lakesidemolds.com/product/2-oz-pyramid-sinker-production-mold-17-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/403068729/P2.webp https://assets.bigcartel.com/product_images/403068738/P3.webp,https://assets.bigcartel.com/product_images/403068735/P4.webp,https://assets.bigcartel.com/product_images/403068732/P5.webp,https://assets.bigcartel.com/product_images/403068741/P6.webp 113016342 new in stock 112665006 8 oz and 10 oz Combo Pyramid Sinker Production Mold ( 14 cavity ) Proudly made in the USA! 14 Cavity 8 oz and 10 oz Pyramid Sinker Mold 7 Cavities of both sizes The mold is set up for #2 Eyelet Clips / Hooks This mold has pins pressed in to hold the eyelet clip in place prior to pouring. Spru is designed for easy cutting or breaking off from the weight. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 288.00 USD https://www.lakesidemolds.com/product/8-oz-and-10-oz-combo-pyramid-sinker-production-mold-14-cavity https://assets.bigcartel.com/product_images/401873952/P1.webp https://assets.bigcartel.com/product_images/401873955/P2.webp,https://assets.bigcartel.com/product_images/401873946/P3.webp,https://assets.bigcartel.com/product_images/401873943/P4.webp,https://assets.bigcartel.com/product_images/401873949/P5.webp,https://assets.bigcartel.com/product_images/401873940/P6.webp 112665006 new in stock 112418793 4 1/2 inch finesse worm and Tail Combo Mold Aluminum Soft Plastic Bait Mold Proudly made in the USA! 4 1/2 inch Worm Mold Plus Worm Tail Mold which will allow you to make different colored tails. 5 Cavity Worm, and 10 Cavity Tail mold in the same mold! Mold makes Lures that are aprx 4 1/2 " inch in length and aprx 1/4 inch in diameter. Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 128.00 USD https://www.lakesidemolds.com/product/4-1-2-inch-worm-mold-plus-tail-only-combo https://assets.bigcartel.com/product_images/401030544/20250314_152345.jpg https://assets.bigcartel.com/product_images/401030556/20250314_152401.jpg,https://assets.bigcartel.com/product_images/401030547/20250314_152700.jpg,https://assets.bigcartel.com/product_images/401030538/20250314_145858.jpg,https://assets.bigcartel.com/product_images/401030550/20250314_145709.jpg,https://assets.bigcartel.com/product_images/401030541/20250314_152642.jpg,https://assets.bigcartel.com/product_images/401030553/20250314_145704.jpg,https://assets.bigcartel.com/product_images/422169294/Worm+Measurements.jpg 112418793 new in stock 111820803 Cobia Knucklehead Jighead ( Similar to Ding-a-Ling Jighead ) 2, 2.5, 3 oz Proudly made in the USA! Cobia Knucklehead Jighead Sizes: (1 Cavity x 2 oz ) ( 2 Cavity x 2 1/2 oz ) ( 2 Cavity x 3 oz ) Please Note: The weights above do not include the weight of the hook, so with the hook included the final weights will be aprx 2.25 oz, 2.75 oz and 3.25 oz Hook Type: (Gamakatsu 13019 9/0) -or- (Mustad 3407DT 9/0) #2 Brass Eye Clip Species this jig targets: Cobia, Stripers, Fluke, Cod, Tuna, Bull Reds, Red Fish, Striped Bass, Grouper, Snook This mold is precision machined out of 6061 Aluminum, and will last for years! 168.00 USD https://www.lakesidemolds.com/product/cobia-knucklehead-jighead https://assets.bigcartel.com/product_images/399004314/20250207_094437.jpg https://assets.bigcartel.com/product_images/399004344/Cobia+Jig.jpg,https://assets.bigcartel.com/product_images/399004317/20250206_190730.jpg,https://assets.bigcartel.com/product_images/399004329/20250206_190107.jpg,https://assets.bigcartel.com/product_images/399004320/20250206_190615.jpg,https://assets.bigcartel.com/product_images/399004323/20250206_190125.jpg,https://assets.bigcartel.com/product_images/399004326/20250206_190834.jpg 111820803 new in stock 111781842 Fish Net Weight Mold - Used in Gill Nets -5 oz- Lead Pipe Style 3/8 inch Through Hole Proudly made in the USA! Fish Net Weight Mold Aprx 5 oz finished weight on each poured piece 4 cavities on both sides ( 8 cavity total ) 3/8 inch through hole Please check your fish net to verify this weight will fit properly ( see pictures for dimensions of the finished weight ) Mold includes (2) 3/8" Teflon pull rods to create the hole in the weight during casting. The Teflon rods are heat resistant and make removal from the finished product very easy. Mold features air vents to prevent air pockets during the casting process. Mold features our very popular spring clamp system for holding the mold closed while you pour the lead. This mold is precision machined out of 6061 Aluminum, and will last for years! 178.00 USD https://www.lakesidemolds.com/product/fish-net-weight-mold-used-in-gill-nets-5-oz-lead-pipe-style-38-inch-through-hole https://assets.bigcartel.com/product_images/398877921/P1.webp https://assets.bigcartel.com/product_images/398877918/P2.webp,https://assets.bigcartel.com/product_images/398877915/P3.webp,https://assets.bigcartel.com/product_images/398877912/P4.webp,https://assets.bigcartel.com/product_images/398877909/P5.webp,https://assets.bigcartel.com/product_images/427518348/Fish+Net+Weight.jpg 111781842 new in stock 111459309 Deep Drop Weight Mold (3 LB x 3 Cavity) ( 2 LB x 3 Cavity ) Proudly made in the USA! 6 Cavity ( 3 LB x 3 Cavity ) ( 2 LB x 3 Cavity ) Deep Drop Weight Mold. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/deep-drop-weight-mold-3-lb-x-3-cavity-2-lb-x-3-cavity https://assets.bigcartel.com/product_images/397792311/20250117_183741.jpg https://assets.bigcartel.com/product_images/397792317/20250117_184148.jpg,https://assets.bigcartel.com/product_images/397792314/20250117_184204.jpg,https://assets.bigcartel.com/product_images/397792320/20250117_183808.jpg,https://assets.bigcartel.com/product_images/397792323/20250117_183814.jpg,https://assets.bigcartel.com/product_images/397792326/20250117_183908.jpg,https://assets.bigcartel.com/product_images/397792329/20250117_183931.jpg 111459309 new in stock 111031977 Spotted Seatrout, Flounder, Puppy Drum, Blackfin Tuna ( 1.5 oz, 2 oz, 2.5 oz ) Jig Mold Proudly made in the USA! Minnow Magic Jig Mold ( 5 Cavity ) 2 Cavity x 1 1/2 oz 2 Cavity x 2 oz 1 x 2 1/2 oz Spotted Seatrout, Speckled Sea Trout, Flounder, Puppy Drum, Blackfin Tuna These jigs use BKK 9070 heavy duty hooks Sizes 7/0 & 8/0 The ribbed shank on this jig was specifcally designed and tested for use with plastics to help prevent the plastics from splitting. The finished eye socket is just under 3/8" ( So any eye size less than 3/8" will fit ) This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 168.00 USD https://www.lakesidemolds.com/product/spotted-seatrout-flounder-puppy-drum-blackfin-tuna-1-5-oz-2-oz-2-5-oz-jig-mold https://assets.bigcartel.com/product_images/396350928/ST1.jpg https://assets.bigcartel.com/product_images/396350922/ST3.jpg,https://assets.bigcartel.com/product_images/396350925/ST2.jpg,https://assets.bigcartel.com/product_images/396350919/ST4.jpg 111031977 new in stock 110832591 3 inch realistic GOBY Minnow Soft Bait Mold Proudly made in the USA! 5 Cavity realistic GOBY Minnow Mold Mold makes Lures that are aprx 3 inch in length This mold was specifically designed to allow adding of accent coloring in areas like the side fins by simply drizzling in some differant colored material. It can also be used with lamination to achieve differant colors. We used 1/4 inch dowel pins to create the eye sockets to ensure clean sockets to apply a 6 mm eye. Our example in the photo has an eye glued in for that natural realistic look. Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 138.00 USD https://www.lakesidemolds.com/product/3-inch-realistic-goby-minnow-soft-bait-mold https://assets.bigcartel.com/product_images/395676363/20241207_124919.jpg https://assets.bigcartel.com/product_images/395676348/20241207_123813.jpg,https://assets.bigcartel.com/product_images/395676357/20241207_125150.jpg,https://assets.bigcartel.com/product_images/395676351/20241207_124940.jpg,https://assets.bigcartel.com/product_images/395676354/20241207_125003.jpg,https://assets.bigcartel.com/product_images/395676360/20241207_125223.jpg,https://assets.bigcartel.com/product_images/395688192/Gobi+Drawing.jpg 110832591 new in stock 110276712 Spotted Seatrout, Flounder, Puppy Drum, Walleye ( 1 oz ) Jig Mold Proudly made in the USA! Spotted Seatrout, Speckled Sea Trout, Flounder, Puppy Drum, Walleye ( 1 oz ) Jig Mold ( 5 Cavity ) These jigs use a Mustad #32786 hook Sizes 5/0 6/0 7/0 hooks. The ribbed shank on this jig was specifcally designed and tested for use with plastics to help prevent the plastics from splitting. The finished eye socket is .28" ( So a 1/4" or 7mm eye will fit ) This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 168.00 USD https://www.lakesidemolds.com/product/spotted-seatrout-flounder-puppy-drum-walleye-1-oz-jig-mold https://assets.bigcartel.com/product_images/393770073/20241110_150523.jpg https://assets.bigcartel.com/product_images/393770091/MM1.jpg,https://assets.bigcartel.com/product_images/393770067/20241110_150648.jpg,https://assets.bigcartel.com/product_images/393770070/20241110_150752.jpg,https://assets.bigcartel.com/product_images/393770076/20241110_150610.jpg,https://assets.bigcartel.com/product_images/393770079/20241110_150634.jpg 110276712 new in stock 110172636 Rock Hound 8 cavity jig Mold ( 4 cavity x 1 oz ) ( 4 cavity x 1.25 oz ) Proudly made in the USA! Rock Hound 8 cavity jig Mold ( 4 cavity x 1 oz ) ( 4 cavity x 1.25 oz ) These jigs work great for fishing heavy current and rocky bottoms. Be sure to check out this video review on YouTube: https://youtu.be/f7257X3rWlY?si=Saz-9N0ur4lavLNN The eye socks are created with 5/16" dowel pins, so #7 eyes work well. This mold is setup to use Eagle Claw Pro-V Jig Hooks ( Model 500R ) Size 4/0 -or- VMC 7150 3/0 These hooks are available from Jannsnetcraft or other online sources The item number from Jannsnetcraft is: 820102 Select Size 4/0 and then what ever color you would like This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... 168.00 USD https://www.lakesidemolds.com/product/rock-hound-8-cavity-jig-mold-4-cavity-x-1-oz-4-cavity-x-1-25-oz https://assets.bigcartel.com/product_images/393405522/20241104_142805.jpg https://assets.bigcartel.com/product_images/393406056/Rock+Hound.jpg,https://assets.bigcartel.com/product_images/393405519/20241104_140737.jpg,https://assets.bigcartel.com/product_images/393405528/20241104_140720.jpg 110172636 new in stock 109967538 Sea Trout or Walleye Jighead Mold - 1/4 oz x 6 Cavity Proudly made in the USA! Sea Trout or Walleye Jighead Mold ( 6 cavity x 1/4 oz ) Model: STRJ25 These jigs use a heavy duty Mustad #32746 hook Sizes 4/0 5/0 6/0 hooks. Please note: Since the mold was designed to accept all 3 sizes of hooks you may experiance minor lead flashing on the smaller hook that can be easily trimmed off. The mold features a ribbed shank that works perfect for attaching plastics lure. Mold included a spring loaded clamp which allows you to securely close the mold without having to hold the handles during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/sea-trout-or-walleye-jighead-mold-1-4-oz-x-6-cavity https://assets.bigcartel.com/product_images/392701047/20241023_155317.jpg https://assets.bigcartel.com/product_images/392701032/screen+shot+2+_1_.jpg,https://assets.bigcartel.com/product_images/392701029/20241023_180953.jpg,https://assets.bigcartel.com/product_images/392701026/20241023_181256.jpg,https://assets.bigcartel.com/product_images/392701044/20241023_155439.jpg,https://assets.bigcartel.com/product_images/392701050/20241023_155300.jpg 109967538 new in stock 109967502 Sea Trout or Walleye Jighead Mold - 3/8 oz x 6 Cavity Proudly made in the USA! Sea Trout or Walleye Jighead Mold ( 6 cavity x 3/8 oz ) Model: STRJ375 These jigs use a heavy duty Mustad #32746 hook Sizes 4/0 5/0 6/0 hooks. Please note: Since the mold was designed to accept all 3 sizes of hooks you may experiance minor lead flashing on the smaller hook that can be easily trimmed off. The mold features a ribbed shank that works perfect for attaching plastics lure. Mold included a spring loaded clamp which allows you to securely close the mold without having to hold the handles during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/sea-trout-or-walleye-jighead-mold-3-8-oz-x-6-cavity https://assets.bigcartel.com/product_images/392700807/20241023_155317.jpg https://assets.bigcartel.com/product_images/392700843/screen+shot+2+_1_.jpg,https://assets.bigcartel.com/product_images/392700840/20241023_180953.jpg,https://assets.bigcartel.com/product_images/392700837/20241023_181256.jpg,https://assets.bigcartel.com/product_images/392700804/20241023_155439.jpg,https://assets.bigcartel.com/product_images/392700810/20241023_155300.jpg 109967502 new in stock 109891215 3 oz Bell Sinker - 22 Cavity Production Mold ( Setup for #1 eyelet ) 22 Cavity 3 oz Bell Sinker Mold ( 11 cavities on both side of mold ) Slot where brass eye gets placed have pins to prevent clip from falling into cavity. Mold Plate is aprx 4 1/2 inch tall The mold is set up for #1 Brass eyelets Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 288.00 USD https://www.lakesidemolds.com/product/3-oz-bell-sinker-22-cavity-production-mold-setup-for-1-eyelet https://assets.bigcartel.com/product_images/392447331/20241017_110536.jpg https://assets.bigcartel.com/product_images/392447328/20241017_110557.jpg,https://assets.bigcartel.com/product_images/392447340/20241017_110608.jpg,https://assets.bigcartel.com/product_images/392447334/20241017_110620.jpg,https://assets.bigcartel.com/product_images/392447337/20241017_110733.jpg 109891215 new in stock 109891164 4 oz Bell Sinker - 20 Cavity Production Mold ( Setup for #1 eyelet ) 20 Cavity 4 oz Bell Sinker Mold ( 10 cavities on both side of mold ) Slot where brass eye gets placed have pins to prevent clip from falling into cavity. Mold Plate is aprx 4 1/2 inch tall The mold is set up for #1 Brass eyelets Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 288.00 USD https://www.lakesidemolds.com/product/4-oz-bell-sinker-20-cavity-production-mold-setup-for-1-eyelet https://assets.bigcartel.com/product_images/392447091/20241017_110930.jpg https://assets.bigcartel.com/product_images/392447094/20241017_110958.jpg,https://assets.bigcartel.com/product_images/392447097/20241017_111004.jpg 109891164 new in stock 109707897 8 oz No Roll Sinker Mold - 10 CAVITY Production Proudly made in the USA! 8 oz No Roll Sinker 10 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 195.00 USD https://www.lakesidemolds.com/product/8-oz-no-roll-sinker-mold-10-cavity-production https://assets.bigcartel.com/product_images/391826760/Generic.jpg 109707897 new in stock 109707726 6 oz No Roll Sinker Mold - 10 CAVITY Production Mold Proudly made in the USA! 6 oz No Roll Sinker 10 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 195.00 USD https://www.lakesidemolds.com/product/6-oz-no-roll-sinker-mold-10-cavity-production-mold https://assets.bigcartel.com/product_images/391825998/20241008_141206.jpg https://assets.bigcartel.com/product_images/391825992/20241008_141258.jpg,https://assets.bigcartel.com/product_images/391825995/20241008_141219.jpg,https://assets.bigcartel.com/product_images/391826001/20241008_141409.jpg,https://assets.bigcartel.com/product_images/391826004/20241008_141229.jpg 109707726 new in stock 109689630 5 oz No Roll Sinker Mold - 10 CAVITY Production Mold Proudly made in the USA! 5 oz No Roll Sinker 10 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/5-oz-no-roll-sinker-mold-10-cavity-production-mold https://assets.bigcartel.com/product_images/391768968/20241007_141508.jpg https://assets.bigcartel.com/product_images/391768959/20241007_141558.jpg,https://assets.bigcartel.com/product_images/391768962/20241007_141624.jpg,https://assets.bigcartel.com/product_images/391768965/20241007_141523.jpg 109689630 new in stock 109628685 3 oz No Roll Sinker Mold - 10 CAVITY Production Mold Proudly made in the USA! 3 oz No Roll Sinker 10 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/3-oz-no-roll-sinker-mold-10-cavity-production-mold https://assets.bigcartel.com/product_images/391557585/20241003_180344.jpg https://assets.bigcartel.com/product_images/391557588/20241003_180316.jpg,https://assets.bigcartel.com/product_images/391557591/20241003_180215.jpg,https://assets.bigcartel.com/product_images/391557597/20241003_180249.jpg,https://assets.bigcartel.com/product_images/391557594/20241003_180209.jpg,https://assets.bigcartel.com/product_images/391557810/dim.jpg 109628685 new in stock 109628505 4 oz No Roll Sinker Mold - 10 CAVITY Production Mold Proudly made in the USA! 4 oz No Roll Sinker 10 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/4-oz-no-roll-sinker-mold-10-cavity-production-mold https://assets.bigcartel.com/product_images/391557222/20241003_174208.jpg https://assets.bigcartel.com/product_images/391557216/20241003_174233.jpg,https://assets.bigcartel.com/product_images/391557210/20241003_174147.jpg,https://assets.bigcartel.com/product_images/391557213/20241003_174118.jpg,https://assets.bigcartel.com/product_images/391557219/20241003_174245.jpg,https://assets.bigcartel.com/product_images/391557207/Dim.jpg 109628505 new in stock 109131432 2 LB x 10 cavity Rock Cod Sinker Production Mold Proudly made in the USA! 10 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes 2 LB weights. The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 198.00 USD https://www.lakesidemolds.com/product/10-cavity-2-lb-cod-sinker-production-mold https://assets.bigcartel.com/product_images/399687492/20250219_121702.jpg https://assets.bigcartel.com/product_images/399687480/20250219_121853.jpg,https://assets.bigcartel.com/product_images/399687483/20250219_121753.jpg,https://assets.bigcartel.com/product_images/399687486/20250219_121720.jpg,https://assets.bigcartel.com/product_images/389870505/2+LB+Cod+Measure.jpg,https://assets.bigcartel.com/product_images/399687471/20250219_122005.jpg,https://assets.bigcartel.com/product_images/399687474/20250219_121958.jpg,https://assets.bigcartel.com/product_images/399687477/20250219_121802.jpg 109131432 new in stock 109123578 Deep Drop Weight Mold ( 2 Cavity ) 12# and 12# Proudly made in the USA! 2 Cavity 12 LB Deep Drop Weight Mold. Please Note: The photo in this ad is from our 7 LB version, but the mold you will receive will be the 12 LB Mold makes (2) 12 LB weights. The weights have a diameter of 1.50" ( 1 1/2" ) so they will fit into a standard rod holder! The length of the weight will be approx. 19 1/2" long The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 238.00 USD https://www.lakesidemolds.com/product/deep-drop-weight-mold-2-cavity-12-and-12 https://assets.bigcartel.com/product_images/389844183/DD1.jpg https://assets.bigcartel.com/product_images/389844180/DD2.jpg,https://assets.bigcartel.com/product_images/389844177/DD3.jpg 109123578 new in stock 109036995 1.5 oz No Roll Sinker Mold - 12 CAVITY Production Mold Proudly made in the USA! 1 1/2 oz No Roll Sinker 12 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process, along with easy grip handles. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/1-5-oz-no-roll-sinker-mold-12-cavity-production-mold https://assets.bigcartel.com/product_images/389489610/20240831_140341.jpg https://assets.bigcartel.com/product_images/389489598/20240831_140429.jpg,https://assets.bigcartel.com/product_images/389489601/20240831_140257.jpg,https://assets.bigcartel.com/product_images/389489604/20240831_140451.jpg,https://assets.bigcartel.com/product_images/389489607/20240831_140433.jpg,https://assets.bigcartel.com/product_images/389489613/20240831_140140.jpg,https://assets.bigcartel.com/product_images/389489616/20240831_140128.jpg 109036995 new in stock 109035816 2 oz No Roll Sinker Mold - 10 CAVITY Production Mold Proudly made in the USA! 2 oz No Roll Sinker 10 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process, along with easy grip handles. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/2-oz-no-roll-sinker-mold-10-cavity-production-mold https://assets.bigcartel.com/product_images/389486067/20240831_114308.jpg https://assets.bigcartel.com/product_images/389486061/20240831_114619.jpg,https://assets.bigcartel.com/product_images/389486064/20240831_114655.jpg,https://assets.bigcartel.com/product_images/389486070/20240831_114628.jpg,https://assets.bigcartel.com/product_images/389486073/20240831_114332.jpg,https://assets.bigcartel.com/product_images/389486076/20240831_114533.jpg 109035816 new in stock 109034061 3/8 oz Trolling Weight Production Mold ( 9 cavity ) Proudly made in the USA! 3/8 oz Trolling Weight Production Mold - 9 cavity Setup to work with Rosco #7 Barrel Swivels ( SKU: 801-7D ) Mold includes spring loaded clamp to hold mold closed during casting process. Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/3-8-oz-trolling-weight-production-mold-9-cavity https://assets.bigcartel.com/product_images/389480667/20240831_103700.jpg https://assets.bigcartel.com/product_images/389480673/20240831_103610.jpg,https://assets.bigcartel.com/product_images/389480670/20240831_103714.jpg,https://assets.bigcartel.com/product_images/389480664/20240831_103743.jpg,https://assets.bigcartel.com/product_images/389480778/20240831_103806.jpg 109034061 new in stock 109033977 5/8 oz Trolling Weight Production Mold ( 9 cavity ) Proudly made in the USA! 5/8 oz Trolling Weight Production Mold - 9 cavity Setup to work with Rosco #7 Barrel Swivels ( SKU: 801-7D ) Mold includes spring loaded clamp to hold mold closed during casting process. Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/5-8-oz-trolling-weight-production-mold-9-cavity https://assets.bigcartel.com/product_images/389480532/2.jpg https://assets.bigcartel.com/product_images/389480526/1.jpg,https://assets.bigcartel.com/product_images/389480520/5.jpg,https://assets.bigcartel.com/product_images/389480523/4.jpg 109033977 new in stock 108848295 3 oz Bank Sinker - 16 Cavity Proudly made in the USA! 3 oz Bank Sinker 16 cavity Production Mold ( You read that right.... 16 Cavities !! ) Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/3-oz-bank-sinker-16-cavity https://assets.bigcartel.com/product_images/388850157/20240820_163829.jpg https://assets.bigcartel.com/product_images/388850151/20240820_163945.jpg,https://assets.bigcartel.com/product_images/388850154/20240820_163931.jpg,https://assets.bigcartel.com/product_images/388850163/20240820_163843.jpg,https://assets.bigcartel.com/product_images/388850160/20240820_163852.jpg 108848295 new in stock 108848169 2 oz Bank Sinker - 16 Cavity Proudly made in the USA! 2 oz Bank Sinker 16 cavity Production Mold ( You read that right.... 16 Cavities !! ) Spru designed to make breaking off by hand simple and clean, or by using traditional cutter method. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/2-oz-bank-sinker-16-cavity https://assets.bigcartel.com/product_images/388849641/20240820_161037.jpg https://assets.bigcartel.com/product_images/388849638/20240820_161152.jpg,https://assets.bigcartel.com/product_images/388849644/20240820_161236.jpg,https://assets.bigcartel.com/product_images/388849647/20240820_161104.jpg,https://assets.bigcartel.com/product_images/388849635/20240820_161210.jpg 108848169 new in stock 108377619 2 oz Bell Sinker Production Mold ( 13 cavity ) 13 Cavity 2 oz Bell Sinker Mold The mold is set up for #1 Brass eyelets Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 168.00 USD https://www.lakesidemolds.com/product/2-oz-bell-sinker-production-mold-13-cavity https://assets.bigcartel.com/product_images/387269244/20240724_123610.jpg https://assets.bigcartel.com/product_images/387269247/20240724_123449.jpg,https://assets.bigcartel.com/product_images/387269250/20240724_123506.jpg,https://assets.bigcartel.com/product_images/387269253/20240724_123647.jpg 108377619 new in stock 108344487 10 oz Flat Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 10 oz Flat Bank Sinker 10 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 258.00 USD https://www.lakesidemolds.com/product/10-oz-flat-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/387161673/20240722_191351.jpg https://assets.bigcartel.com/product_images/387161667/20240722_191514.jpg,https://assets.bigcartel.com/product_images/387161670/20240722_191359.jpg,https://assets.bigcartel.com/product_images/387161676/20240722_191321.jpg 108344487 new in stock 108344460 4 oz Flat Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 4 oz Flat Bank Sinker 10 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/4-oz-flat-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/404135055/4+oz+Bank+Sinker.jpg 108344460 new in stock 106428093 Bottom Bouncer Weight Mold - 3 oz, 4 oz, 5 oz Proudly made in the USA! Bottom Bouncer Weight Mold - 3 Cavity ( 3 oz, 4 oz, 5 oz ) Note: This mold is currently setup for .040" wire, however we can change this if you would rather have a larger slot.. just drop us a message and we will gladly make the change. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 128.00 USD https://www.lakesidemolds.com/product/bottom-bouncer-weight-mold-3-oz-4-oz-5-oz https://assets.bigcartel.com/product_images/380871456/20240407_155715.jpg https://assets.bigcartel.com/product_images/380871459/20240407_155731.jpg,https://assets.bigcartel.com/product_images/380871462/20240407_155736.jpg,https://assets.bigcartel.com/product_images/380871465/20240407_155744.jpg,https://assets.bigcartel.com/product_images/380871483/20240407_155835.jpg 106428093 new in stock 106330452 Rock Hound 8 cavity jig Mold ( 4 cavity x 3/4 oz ) ( 4 cavity x 1 oz ) Proudly made in the USA! Rock Hound 8 cavity jig Mold ( 4 cavity x 3/4 oz ) ( 4 cavity x 1 oz ) These jigs work great for fishing heavy current and rocky bottoms. Be sure to check out this video review on YouTube: https://youtu.be/f7257X3rWlY?si=Saz-9N0ur4lavLNN The eye socks are created with 5/16" dowel pins, so #7 eyes work well. This mold is setup to use Eagle Claw Pro-V Jig Hooks ( Model 500R ) Size 4/0 -or- VMC 7150 3/0 These hooks are available from Jannsnetcraft or other online sources The item number from Jannsnetcraft is: 820102 Select Size 4/0 and then what ever color you would like This mold is precision machined out of 6061 Aluminum, and will last for years! Be sure to check out all of the photos for close up detail of the mold... 168.00 USD https://www.lakesidemolds.com/product/rock-hound-8-cavity-jig-mold-4-cavity-x-3-4-oz-4-cavity-x-1-oz https://assets.bigcartel.com/product_images/380551734/20240401_155307.jpg https://assets.bigcartel.com/product_images/380551749/Minnesota+Money+Jig.jpg,https://assets.bigcartel.com/product_images/380551752/Minnesota+Money+Jig+-+2.jpg,https://assets.bigcartel.com/product_images/380551731/20240401_155335.jpg,https://assets.bigcartel.com/product_images/380551737/20240401_155430.jpg,https://assets.bigcartel.com/product_images/380551740/20240401_155704.jpg,https://assets.bigcartel.com/product_images/380551743/20240401_155449.jpg,https://assets.bigcartel.com/product_images/380551746/Minnesota+Money+Jig+-+3.jpg 106330452 new in stock 105399240 3 LB x 6 Cavity Deep Drop Weight Mold Proudly made in the USA! 6 Cavity 3 LB Cod Sinker / Deep Drop Weight Mold. Mold makes (6) x 3 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 248.00 USD https://www.lakesidemolds.com/product/cod-sinker-deep-drop-weight-mold-3-lb-6-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/377787663/Deep+Drop+1.jpg https://assets.bigcartel.com/product_images/377787657/Deep+Drop+3.jpg,https://assets.bigcartel.com/product_images/377787651/Deep+Drop+5.jpg,https://assets.bigcartel.com/product_images/377787654/Deep+Drop+4.jpg,https://assets.bigcartel.com/product_images/377787660/Deep+Drop+2.jpg 105399240 new in stock 103751932 1 oz No Roll Sinker Mold - 16 CAVITY Production Mold Proudly made in the USA! 1 oz No Roll Sinker 16 cavity Production Mold Mold has a Spring Loaded clamp that holds the mold tight during the casting process, along with easy grip handles. Mold includes heat resistant Teflon coated pull rods to create the hole through the weight. ( aprx diameter 1/8" ) Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 188.00 USD https://www.lakesidemolds.com/product/1-oz-no-roll-sinker-mold-16-cavity-production-mold https://assets.bigcartel.com/product_images/373157071/No+Roll+1.jpg https://assets.bigcartel.com/product_images/373157065/No+Roll+3.jpg,https://assets.bigcartel.com/product_images/373157068/No+Roll+2.jpg,https://assets.bigcartel.com/product_images/373157062/No+Roll+4.jpg,https://assets.bigcartel.com/product_images/373157059/No+Roll+5.jpg 103751932 new in stock 103140046 Egg Sinker Production Mold 3/8 - 1/2 - 3/4 oz ( 22 Cavity ) Proudly made in the USA! Egg Sinker Production Mold ( With Teflon Heat Resistant Pull Rods! ) 3/8 oz ( 12 Cavity ) 1/2 oz ( 5 Cavity ) 3/4 oz ( 5 Cavity ) This Hinged Mold includes a built in spring loaded clamp which keeps the mold tightly closed during the pouring process. The Heat Resistant Teflon pull rods pull out like running a hot knife through butter! The hole diameter is just shy of 1/8 inch The mold has vents cut in for air to escape during casting.... which ensures near perfect pours every time! This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 228.00 USD https://www.lakesidemolds.com/product/egg-sinker-production-mold-3-8-1-2-3-4-oz-22-cavity https://assets.bigcartel.com/product_images/371457502/20231102_181742.jpg https://assets.bigcartel.com/product_images/371457505/20231102_181810.jpg,https://assets.bigcartel.com/product_images/371457508/20231102_182129.jpg,https://assets.bigcartel.com/product_images/371457511/20231102_181430.jpg,https://assets.bigcartel.com/product_images/371457541/Side+View.jpg 103140046 new in stock 101421943 8 oz Flat Bank Sinker 10 Cavity Production Mold Proudly made in the USA! 8 oz Flat Bank Sinker 10 cavity Production Mold Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Spru cuts off nice and clean for minimal further trimming Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 248.00 USD https://www.lakesidemolds.com/product/8-oz-flat-bank-sinker-10-cavity-production-mold https://assets.bigcartel.com/product_images/366842560/P1.png https://assets.bigcartel.com/product_images/366842566/P2.png,https://assets.bigcartel.com/product_images/366842620/P4.png,https://assets.bigcartel.com/product_images/366842563/P3.png,https://assets.bigcartel.com/product_images/366842656/P5.png 101421943 new in stock 101165329 10 Cavity 1 LB Deep Drop Weight Production Mold Proudly made in the USA! 10 Cavity 1 LB Cod Sinker / Deep Drop Weight Mold. Mold makes (10) 1 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #2 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 218.00 USD https://www.lakesidemolds.com/product/10-cavity-1-lb-deep-drop-weight-production-mold https://assets.bigcartel.com/product_images/366166147/IMG_20230807_142428.jpg https://assets.bigcartel.com/product_images/366166144/IMG_20230807_142510.jpg,https://assets.bigcartel.com/product_images/366166150/IMG_20230807_142527.jpg,https://assets.bigcartel.com/product_images/366166153/IMG_20230807_142542.jpg,https://assets.bigcartel.com/product_images/366166156/IMG_20230807_142708.jpg 101165329 new in stock 99854458 3 1/2 inch GOBY Minnow Aluminum Injection Soft Bait Mold Proudly made in the USA! 4 Cavity GOBY Minnow Mold ( Great for Walleye and Bass Fishing ) Mold makes Lures that are aprx 3 1/2 inch in length Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! 128.00 USD https://www.lakesidemolds.com/product/3-1-2-inch-goby-minnow-aluminum-injection-soft-bait-mold https://assets.bigcartel.com/product_images/362689759/G-1.jpg https://assets.bigcartel.com/product_images/362689762/G-3.jpg,https://assets.bigcartel.com/product_images/362689765/G-2.jpg,https://assets.bigcartel.com/product_images/362689771/g5.png,https://assets.bigcartel.com/product_images/362689768/G-4.jpg 99854458 new in stock 99826378 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/4 and 3/8 oz Combo Mold ( Kit 300 ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Starter Kit includes: ( 3 Cavity x 1/4 oz ) (3 Cavity x 3/8 oz ) Hinged Mold 300 Mustad #6 Hooks 300 "Style B" Wire Inserts 300 "Small" Plastic Tail Fins Mold is 2 1/2" x 8" with comfortable rubber handles Mold uses Mustad 33903-BR (#6 Hooks) Mold uses our "Style B" Wire Inserts for both sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/4 and 3/8 oz ( Available in Clear and Red ) We use 3/16 inch dowel pins to create the eye socket in the mold, so any stick on eyes that are less than 3/16 inch will work fine. 315.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-4-and-3-8-oz-combo-mold-kit-300 https://assets.bigcartel.com/product_images/362614390/Pic+1.jpg https://assets.bigcartel.com/product_images/362614393/Pic+2.jpg,https://assets.bigcartel.com/product_images/362614387/Pic+4.jpg,https://assets.bigcartel.com/product_images/362614384/Pic+3.jpg,https://assets.bigcartel.com/product_images/362614381/Pic+5.jpg 99826378 new in stock 99826357 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/4 and 3/8 oz Combo Mold ( Kit 200 ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Starter Kit includes: ( 3 Cavity x 1/4 oz ) (3 Cavity x 3/8 oz ) Hinged Mold 200 Mustad #6 Hooks 200 "Style B" Wire Inserts 200 "Small" Plastic Tail Fins Mold is 2 1/2" x 8" with comfortable rubber handles Mold uses Mustad 33903-BR (#6 Hooks) Mold uses our "Style B" Wire Inserts for both sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/4 and 3/8 oz ( Available in Clear and Red ) We use 3/16 inch dowel pins to create the eye socket in the mold, so any stick on eyes that are less than 3/16 inch will work fine. 289.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-4-and-3-8-oz-combo-mold-kit-200 https://assets.bigcartel.com/product_images/362614288/Pic+1.jpg https://assets.bigcartel.com/product_images/362614291/Pic+2.jpg,https://assets.bigcartel.com/product_images/362614282/Pic+4.jpg,https://assets.bigcartel.com/product_images/362614285/Pic+3.jpg,https://assets.bigcartel.com/product_images/362614297/Pic+5.jpg 99826357 new in stock 99826243 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/4 and 3/8 oz Combo Mold ( Kit 100 ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Starter Kit includes: ( 3 Cavity x 1/4 oz ) (3 Cavity x 3/8 oz ) Hinged Mold 100 Mustad #6 Hooks 100 "Style B" Wire Inserts 100 "Small" Plastic Tail Fins Mold is 2 1/2" x 8" with comfortable rubber handles Mold uses Mustad 33903-BR (#6 Hooks) Mold uses our "Style B" Wire Inserts for both sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/4 and 3/8 oz ( Available in Clear and Red ) We use 3/16 inch dowel pins to create the eye socket in the mold, so any stick on eyes that are less than 3/16 inch will work fine. 238.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-4-and-3-8-oz-combo-mold-kit-100 https://assets.bigcartel.com/product_images/362614228/Pic+1.jpg https://assets.bigcartel.com/product_images/362614231/Pic+2.jpg,https://assets.bigcartel.com/product_images/362614225/Pic+4.jpg,https://assets.bigcartel.com/product_images/362614222/Pic+3.jpg,https://assets.bigcartel.com/product_images/362614219/Pic+5.jpg 99826243 new in stock 99814432 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/4 and 3/8 oz Combo Mold ( Starter Kit ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Starter Kit includes: ( 3 Cavity x 1/4 oz ) (3 Cavity x 3/8 oz ) Hinged Mold 50 Mustad #6 Hooks 50 "Style B" Wire Inserts 50 "Small" Plastic Tail Fins Mold is 2 1/2" x 8" with comfortable rubber handles Mold uses Mustad 33903-BR (#6 Hooks) Mold uses our "Style B" Wire Inserts for both sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/4 and 3/8 oz ( Available in Clear and Red ) We use 3/16 inch dowel pins to create the eye socket in the mold, so any stick on eyes that are less than 3/16 inch will work fine. 168.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-4-and-3-8-oz-combo-mold-starter-kit https://assets.bigcartel.com/product_images/362583019/Pic+1.jpg https://assets.bigcartel.com/product_images/362583010/Pic+4.jpg,https://assets.bigcartel.com/product_images/362583013/Pic+3.jpg,https://assets.bigcartel.com/product_images/362583016/Pic+2.jpg,https://assets.bigcartel.com/product_images/362583007/Pic+5.jpg 99814432 new in stock 99814114 Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 1,000 PK ) Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 1,000 PK ) 165.00 USD https://www.lakesidemolds.com/product/wire-insert-style-b-used-in-1-4-and-3-8-oz-jigging-minnow-jig-mold-1-000-pk https://assets.bigcartel.com/product_images/362581780/Wire+Insert.jpg https://assets.bigcartel.com/product_images/362581783/Wire+Insert+2.jpg 99814114 new in stock 99814090 Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 500 PK ) Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 500 PK ) 89.95 USD https://www.lakesidemolds.com/product/wire-insert-style-b-used-in-1-4-and-3-8-oz-jigging-minnow-jig-mold-500-pk https://assets.bigcartel.com/product_images/362581729/Wire+Insert.jpg https://assets.bigcartel.com/product_images/362581726/Wire+Insert+2.jpg 99814090 new in stock 99814048 Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 300 PK ) Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 300 PK ) 64.95 USD https://www.lakesidemolds.com/product/wire-insert-style-b-used-in-1-4-and-3-8-oz-jigging-minnow-jig-mold-300-pk https://assets.bigcartel.com/product_images/362581681/Wire+Insert.jpg https://assets.bigcartel.com/product_images/362581678/Wire+Insert+2.jpg 99814048 new in stock 99814039 Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 200 PK ) Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 200 PK ) 49.00 USD https://www.lakesidemolds.com/product/wire-insert-style-b-used-in-1-4-and-3-8-oz-jigging-minnow-jig-mold-200-pk https://assets.bigcartel.com/product_images/362581630/Wire+Insert.jpg https://assets.bigcartel.com/product_images/362581633/Wire+Insert+2.jpg 99814039 new in stock 99813946 Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 100 PK ) Wire Insert ( Style B ) Used in 1/4 and 3/8 oz Jigging Minnow Jig Mold ( 100 PK ) 27.00 USD https://www.lakesidemolds.com/product/wire-insert-style-b-used-in-1-4-and-3-8-oz-jigging-minnow-jig-mold-100-pk https://assets.bigcartel.com/product_images/362581471/Wire+Insert.jpg https://assets.bigcartel.com/product_images/362581477/Wire+Insert+2.jpg 99813946 new in stock 99320689 Baby EEL 6 Cavity Soft Plastics Mold Proudly made in the USA! 6 Cavity Baby EEL Mold Mold makes Lures that are aprx 4.25 inch in length Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! 128.00 USD https://www.lakesidemolds.com/product/baby-eel-6-cavity-soft-plastics-mold https://assets.bigcartel.com/product_images/361295062/IMG_20230522_154115.jpg https://assets.bigcartel.com/product_images/361295050/IMG_20230522_152051.jpg,https://assets.bigcartel.com/product_images/361295053/IMG_20230522_152123.jpg,https://assets.bigcartel.com/product_images/361295056/IMG_20230522_154205.jpg,https://assets.bigcartel.com/product_images/361295059/IMG_20230522_154254.jpg 99320689 new in stock 97720753 Dredge Weight - Fish Shaped ( 15 LB ) Proudly made in the USA! 1 Cavity 15 LB Fish Shaped Dredge Weight Mold. This mold has been designed to ensure perfect pours each and every time. We added several vents in the mold to prevent air pockets. The mold is Very heavy duty.... both mold plates weigh 28+ pounds, so the mold is very well built to ensure many years of use. Mold makes 15 LB weights. The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold features dowel pins to hold the downrigger eyelet clips in place during the casting process. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) This mold is precision machined out of 6061 Aluminum, and will last for years! 378.00 USD https://www.lakesidemolds.com/product/dredge-weight-fish-shaped-15-lb https://assets.bigcartel.com/product_images/357027547/P-1.jpg https://assets.bigcartel.com/product_images/357027541/P-2.jpg,https://assets.bigcartel.com/product_images/357027544/P-3.jpg,https://assets.bigcartel.com/product_images/357027538/P-4.jpg 97720753 new in stock 97657399 Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 300 pieces - Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 300 pieces - These are the ( ORIGINAL STYLE ) 64.95 USD https://www.lakesidemolds.com/product/wire-inserts-used-in-3-4-1-oz-casting-minnow-jig-mold-300-pieces https://assets.bigcartel.com/product_images/356844808/s-l1600.jpg 97657399 new in stock 97657324 Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 300 pk ) Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 300 pk ) BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well. The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 79.00 USD https://www.lakesidemolds.com/product/plastic-tail-fins-for-3-4-oz-1-oz-casting-minnows-300-pk https://assets.bigcartel.com/product_images/356844649/s-l1600+_2_.jpg https://assets.bigcartel.com/product_images/356844652/s-l1600.jpg,https://assets.bigcartel.com/product_images/356844646/s-l1600+_1_.jpg 97657324 new in stock 97657144 Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 300 PK ) Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 300 PK ) 64.95 USD https://www.lakesidemolds.com/product/wire-insert-style-a-used-in-1-2-to-1-oz-jigging-minnow-jig-mold-300-pk https://assets.bigcartel.com/product_images/362582071/Wire+Insert.jpg https://assets.bigcartel.com/product_images/362582074/Wire+Insert+2.jpg 97657144 new in stock 95960830 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1 oz ( Starter Kit ) Proudly Manufactured in the USA! Vertical Jigging and Casting 1 oz Minnow Mold. Precision CNC Machined. This Mold Starter Kit includes: 6 Cavity x 1 oz Hinged Mold 50 Mustad #2 Hooks 50 "Style A" Wire Inserts 50 "Large" Plastic Tail Fins This mold has 6 cavities ( Cavity Size: 1 oz ) Mold is 3" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#2 Hooks) Mold uses our "Style A" Wire Inserts Mold Uses our "Large" Sized Plastic Tail Fins ( Available in Clear and Red ) 188.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-oz-starter-kit https://assets.bigcartel.com/product_images/352404583/1+oz.JPG https://assets.bigcartel.com/product_images/352404580/s-l1600.jpg,https://assets.bigcartel.com/product_images/352404574/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/352404577/s-l1600+_4_.jpg 95960830 new in stock 95960224 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 3/4 oz ( Starter Kit ) Proudly Manufactured in the USA! Vertical Jigging and Casting 3/4 oz Minnow Mold. Precision CNC Machined. This Mold Starter Kit includes: 6 Cavity x 3/4 oz Hinged Mold 50 Mustad #2 Hooks 50 "Style A" Wire Inserts 50 "Large" Plastic Tail Fins This mold has 6 cavities ( Cavity Size: 3/4 oz ) Mold is 3" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#2 Hooks) Mold uses our "Style A" Wire Inserts Mold Uses our "Large" Sized Plastic Tail Fins ( Available in Clear and Red ) 188.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-3-4-oz-starter-kit https://assets.bigcartel.com/product_images/352404385/.75+oz.JPG https://assets.bigcartel.com/product_images/352404382/s-l1600.jpg,https://assets.bigcartel.com/product_images/352404376/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/352404379/s-l1600+_4_.jpg 95960224 new in stock 95960116 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 - 3/4 - 1 oz Combo Mold ( Kit 300 ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Kit 300 includes enough components to make 300 lures: ( 2 Cavity x 1/2 oz ) ( 2 Cavity x 3/4 oz ) ( 2 Cavity x 1 oz ) Hinged Mold 150 Mustad #2 Hooks 150 Mustad #4 Hooks 300 "Style A" Wire Inserts 150 "Small" Plastic Tail Fins 150 "Large" Plastic Tail Fins Mold is 3 1/2" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) for the 1/2 oz Mold uses Mustad 33903-BR ( #2 Hooks ) for the 3/4 and 1 oz Mold uses our "Style A" Wire Inserts for all 3 sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/2 oz ( Available in Clear and Red ) Mold Uses our "Large" Sized Plastic Tail Fins for the 3/4 and 1 oz ( Available in Clear and Red ) 335.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-3-4-1-oz-combo-mold-kit-300 https://assets.bigcartel.com/product_images/352402714/Combo+Mold.jpg https://assets.bigcartel.com/product_images/352402708/s-l1600.jpg,https://assets.bigcartel.com/product_images/352402702/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/352402705/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/352402711/s-l1600+_4_.jpg 95960116 new in stock 95960077 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 - 3/4 - 1 oz Combo Mold ( Kit 200 ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Kit 200 includes enough components to make 200 lures: ( 2 Cavity x 1/2 oz ) ( 2 Cavity x 3/4 oz ) ( 2 Cavity x 1 oz ) Hinged Mold 100 Mustad #2 Hooks 100 Mustad #4 Hooks 200 "Style A" Wire Inserts 100 "Small" Plastic Tail Fins 100 "Large" Plastic Tail Fins Mold is 3 1/2" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) for the 1/2 oz Mold uses Mustad 33903-BR ( #2 Hooks ) for the 3/4 and 1 oz Mold uses our "Style A" Wire Inserts for all 3 sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/2 oz ( Available in Clear and Red ) Mold Uses our "Large" Sized Plastic Tail Fins for the 3/4 and 1 oz ( Available in Clear and Red ) 309.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-3-4-1-oz-combo-mold-kit-200 https://assets.bigcartel.com/product_images/352402561/Combo+Mold.jpg https://assets.bigcartel.com/product_images/352402555/s-l1600.jpg,https://assets.bigcartel.com/product_images/352402546/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/352402549/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/352402552/s-l1600+_4_.jpg 95960077 new in stock 95959063 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 - 3/4 - 1 oz Combo Mold ( Kit 100 ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Kit 100 includes enough components to make 100 lures: ( 2 Cavity x 1/2 oz ) ( 2 Cavity x 3/4 oz ) ( 2 Cavity x 1 oz ) Hinged Mold 50 Mustad #2 Hooks 50 Mustad #4 Hooks 100 "Style A" Wire Inserts 50 "Small" Plastic Tail Fins 50 "Large" Plastic Tail Fins Mold is 3 1/2" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) for the 1/2 oz Mold uses Mustad 33903-BR ( #2 Hooks ) for the 3/4 and 1 oz Mold uses our "Style A" Wire Inserts for all 3 sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/2 oz ( Available in Clear and Red ) Mold Uses our "Large" Sized Plastic Tail Fins for the 3/4 and 1 oz ( Available in Clear and Red ) 258.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-3-4-1-oz-combo-mold-kit-100 https://assets.bigcartel.com/product_images/352400128/Combo+Mold.jpg https://assets.bigcartel.com/product_images/352400125/s-l1600.jpg,https://assets.bigcartel.com/product_images/352400116/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/352400119/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/352400122/s-l1600+_4_.jpg 95959063 new in stock 95958421 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 - 3/4 - 1 oz Combo Mold ( Starter Kit ) Proudly Manufactured in the USA! Vertical Jigging and Casting Minnow 6 Cavity Mold. Precision CNC Machined. This Mold Starter Kit includes: ( 2 Cavity x 1/2 oz ) ( 2 Cavity x 3/4 oz ) ( 2 Cavity x 1 oz ) Hinged Mold 25 Mustad #2 Hooks 25 Mustad #4 Hooks 50 "Style A" Wire Inserts 25 "Small" Plastic Tail Fins 25 "Large" Plastic Tail Fins Mold is 3 1/2" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) for the 1/2 oz Mold uses Mustad 33903-BR ( #2 Hooks ) for the 3/4 and 1 oz Mold uses our "Style A" Wire Inserts for all 3 sizes Mold Uses our "Small" Sized Plastic Tail Fins for the 1/2 oz ( Available in Clear and Red ) Mold Uses our "Large" Sized Plastic Tail Fins for the 3/4 and 1 oz ( Available in Clear and Red ) 188.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-3-4-1-oz-combo-mold-starter-kit https://assets.bigcartel.com/product_images/352399456/Combo+Mold.jpg https://assets.bigcartel.com/product_images/352398730/LakeSide+Molds+Logo.jpg,https://assets.bigcartel.com/product_images/352399537/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/352399306/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/352399342/s-l1600+_4_.jpg 95958421 new in stock 95490265 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 oz ( Kit 300 ) Proudly Manufactured in the USA! Vertical Jigging and Casting 1/2 oz Minnow Mold. Precision CNC Machined. This Mold Starter Kit includes: 6 Cavity x 1/2 oz Hinged Mold 300 Mustad #4 Hooks 300 "Style A" Wire Inserts 300 "Small" Plastic Tail Fins This mold has 6 cavities ( Cavity Size: 1/2 oz ) Mold is 3" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) Mold uses our "Style A" Wire Inserts Mold Uses our "Small" Sized Plastic Tail Fins ( Available in Clear and Red ) 335.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-oz-kit-300 https://assets.bigcartel.com/product_images/351251293/Vertical+Jig+1.jpg https://assets.bigcartel.com/product_images/352388203/LakeSide+Molds+Logo.jpg,https://assets.bigcartel.com/product_images/351251290/Vertical+Jig+2.jpg,https://assets.bigcartel.com/product_images/351251287/Vertical+Jig+5.jpg,https://assets.bigcartel.com/product_images/351251281/Vertical+Jig+6.jpg 95490265 new in stock 95490232 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 oz ( Kit 200 ) Proudly Manufactured in the USA! Vertical Jigging and Casting 1/2 oz Minnow Mold. Precision CNC Machined. This Mold Starter Kit includes: 6 Cavity x 1/2 oz Hinged Mold 200 Mustad #4 Hooks 200 "Style A" Wire Inserts 200 "Small" Plastic Tail Fins This mold has 6 cavities ( Cavity Size: 1/2 oz ) Mold is 3" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) Mold uses our "Style A" Wire Inserts Mold Uses our "Small" Sized Plastic Tail Fins ( Available in Clear and Red ) 309.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-oz-kit-200 https://assets.bigcartel.com/product_images/351251227/Vertical+Jig+1.jpg https://assets.bigcartel.com/product_images/352388125/LakeSide+Molds+Logo.jpg,https://assets.bigcartel.com/product_images/351251224/Vertical+Jig+2.jpg,https://assets.bigcartel.com/product_images/351251218/Vertical+Jig+5.jpg,https://assets.bigcartel.com/product_images/351251215/Vertical+Jig+6.jpg 95490232 new in stock 95490217 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 oz ( Kit 100 ) Proudly Manufactured in the USA! Vertical Jigging and Casting 1/2 oz Minnow Mold. Precision CNC Machined. This Mold Starter Kit includes: 6 Cavity x 1/2 oz Hinged Mold 100 Mustad #4 Hooks 100 "Style A" Wire Inserts 100 "Small" Plastic Tail Fins This mold has 6 cavities ( Cavity Size: 1/2 oz ) Mold is 3" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) Mold uses our "Style A" Wire Inserts Mold Uses our "Small" Sized Plastic Tail Fins ( Available in Clear and Red ) 258.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-oz-kit-100 https://assets.bigcartel.com/product_images/351251125/Vertical+Jig+1.jpg https://assets.bigcartel.com/product_images/352388074/LakeSide+Molds+Logo.jpg,https://assets.bigcartel.com/product_images/351251128/Vertical+Jig+2.jpg,https://assets.bigcartel.com/product_images/351251119/Vertical+Jig+5.jpg,https://assets.bigcartel.com/product_images/351251116/Vertical+Jig+6.jpg 95490217 new in stock 95490151 Vertical Jigging Minnow Mold ( 6 cavity ) Size: 1/2 oz ( Starter Kit ) Proudly Manufactured in the USA! Vertical Jigging and Casting 1/2 oz Minnow Mold. Precision CNC Machined. This Mold Starter Kit includes: 6 Cavity x 1/2 oz Hinged Mold 50 Mustad #4 Hooks 50 "Style A" Wire Inserts 50 "Small" Plastic Tail Fins This mold has 6 cavities ( Cavity Size: 1/2 oz ) Mold is 3" x 9" with comfortable rubber handles Mold uses Mustad 33903-BR (#4 Hooks) Mold uses our "Style A" Wire Inserts Mold Uses our "Small" Sized Plastic Tail Fins ( Available in Clear and Red ) 188.00 USD https://www.lakesidemolds.com/product/vertical-jigging-minnow-mold-6-cavity-size-1-2-oz-starter-kit https://assets.bigcartel.com/product_images/351251023/Vertical+Jig+1.jpg https://assets.bigcartel.com/product_images/352388047/LakeSide+Molds+Logo.jpg,https://assets.bigcartel.com/product_images/351251020/Vertical+Jig+2.jpg,https://assets.bigcartel.com/product_images/351251014/Vertical+Jig+5.jpg,https://assets.bigcartel.com/product_images/351251011/Vertical+Jig+6.jpg 95490151 new in stock 94544593 Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 1,000 PK ) Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 1,000 PK ) 165.00 USD https://www.lakesidemolds.com/product/1-000-pk-wire-inserts-used-in-1-4-oz-3-8-oz-1-2-oz-casting-minnow-jig-mold https://assets.bigcartel.com/product_images/348789829/20221118_142647.jpg https://assets.bigcartel.com/product_images/348790774/Screen+Shot.jpg 94544593 new in stock 94544569 Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 500 PK ) Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 500 PK ) 89.95 USD https://www.lakesidemolds.com/product/500-pk-wire-inserts-used-in-1-4-oz-3-8-oz-1-2-oz-casting-minnow-jig-mold https://assets.bigcartel.com/product_images/348789790/20221118_142647.jpg https://assets.bigcartel.com/product_images/348790720/Screen+Shot.jpg 94544569 new in stock 94544455 Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 200 PK ) Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 200 PK ) 49.00 USD https://www.lakesidemolds.com/product/200-pk-wire-inserts-used-in-1-4-oz-3-8-oz-1-2-oz-casting-minnow-jig-mold https://assets.bigcartel.com/product_images/348789751/20221118_142647.jpg https://assets.bigcartel.com/product_images/348790675/Screen+Shot.jpg 94544455 new in stock 94543984 ( 1,000 PK ) - Plastic Tail Fins -SMALLER SIZE- for 1/4 - 3/8 - 1/2 oz Casting Minnows 1,000 PK Plastic Tail Fins for 1/4 - 3/8 - 1/2 oz Casting Minnows BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well, however the best option is to use 2 part Epoxy The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 237.00 USD https://www.lakesidemolds.com/product/1-000-pk-plastic-tail-fins-smaller-size-for-1-4-3-8-1-2-oz-casting-minnows https://assets.bigcartel.com/product_images/348790015/Fin+1.jpg https://assets.bigcartel.com/product_images/348790018/Fin+2.jpg,https://assets.bigcartel.com/product_images/348790021/Fin+3.jpg 94543984 new in stock 94543942 ( 500 PK ) - Plastic Tail Fins -SMALLER SIZE- for 1/4 - 3/8 - 1/2 oz Casting Minnows 500 PK Plastic Tail Fins for 1/4 - 3/8 - 1/2 oz Casting Minnows BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well, however the best option is to use 2 part Epoxy The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 125.00 USD https://www.lakesidemolds.com/product/500-pk-plastic-tail-fins-smaller-size-for-1-4-3-8-1-2-oz-casting-minnows https://assets.bigcartel.com/product_images/348789967/Fin+1.jpg https://assets.bigcartel.com/product_images/348789970/Fin+2.jpg,https://assets.bigcartel.com/product_images/348789973/Fin+3.jpg 94543942 new in stock 94543906 ( 200 PK ) - Plastic Tail Fins -SMALLER SIZE- for 1/4 - 3/8 - 1/2 oz Casting Minnows 200 PK Plastic Tail Fins for 1/4 - 3/8 - 1/2 oz Casting Minnows BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well, however the best option is to use 2 part Epoxy The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 58.00 USD https://www.lakesidemolds.com/product/200-pk-plastic-tail-fins-smaller-size-for-1-4-3-8-1-2-oz-casting-minnows https://assets.bigcartel.com/product_images/348789937/Fin+1.jpg https://assets.bigcartel.com/product_images/348789940/Fin+2.jpg,https://assets.bigcartel.com/product_images/348789943/Fin+3.jpg 94543906 new in stock 94543627 ( 100 PK ) - Plastic Tail Fins -SMALLER SIZE- for 1/4 - 3/8 - 1/2 oz Casting Minnows 100 PK Plastic Tail Fins for 1/4 - 3/8 - 1/2 oz Casting Minnows BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well, however the best option is to use 2 part Epoxy The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 32.00 USD https://www.lakesidemolds.com/product/plastic-tail-fins-smaller-size-for-1-4-3-8-1-2-oz-casting-minnows https://assets.bigcartel.com/product_images/348789874/Fin+1.jpg https://assets.bigcartel.com/product_images/348789883/Fin+2.jpg,https://assets.bigcartel.com/product_images/348789889/Fin+3.jpg 94543627 new in stock 94542604 Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 100 PK ) Wire Insert ( Style A ) Used in our 1/2 - 3/4 - 1 oz vertical Jigging Minnow Jig Mold ( 100 PK ) 27.00 USD https://www.lakesidemolds.com/product/wire-inserts-used-in-1-4-oz-3-8-oz-1-2-oz-casting-minnow-jig-mold https://assets.bigcartel.com/product_images/348785140/20221118_142647.jpg https://assets.bigcartel.com/product_images/348790576/Screen+Shot.jpg 94542604 new in stock 89751597 Deep Drop Weight Mold ( 2 Cavity ) 6# and 6# Proudly made in the USA! 2 Cavity 6 LB Deep Drop Weight Mold. Mold makes (2) 6 LB weights. The weights have a diameter of 1.50" ( 1 1/2" ) so they will fit into a standard rod holder! The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 198.00 USD https://www.lakesidemolds.com/product/deep-drop-weight-mold-2-cavity-6-and-6 https://assets.bigcartel.com/product_images/336070980/Mold+B.jpg https://assets.bigcartel.com/product_images/336070971/Mold+A.jpg,https://assets.bigcartel.com/product_images/336070974/Mold+E.jpg,https://assets.bigcartel.com/product_images/336070977/Mold+C.jpg,https://assets.bigcartel.com/product_images/336070968/Mold+D.jpg 89751597 new in stock 89360427 Deep Drop Weight Mold ( 2 Cavity ) 10# and 10# Proudly made in the USA! 2 Cavity 10 LB Deep Drop Weight Mold. Please Note: The photo in this ad is from our 7 LB version, but the mold you will receive will be the 10 LB Mold makes (2) 10 LB weights. The weights have a diameter of 1.50" ( 1 1/2" ) so they will fit into a standard rod holder! The length of the weight will be approx. 15 1/4" long The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 228.00 USD https://www.lakesidemolds.com/product/deep-drop-weight-mold-2-cavity-10-and-10 https://assets.bigcartel.com/product_images/335024085/Weight+1.jpg https://assets.bigcartel.com/product_images/335024082/Weight+2.jpg,https://assets.bigcartel.com/product_images/335024079/Weight+3.jpg 89360427 new in stock 89360352 Deep Drop Weight Mold ( 2 Cavity ) 8# and 8# Proudly made in the USA! 2 Cavity 8 LB Deep Drop Weight Mold. Please Note: The photo in this ad is from our 7 LB version, but the mold you will receive will be the 8 LB Mold makes (2) 8 LB weights. The weights have a diameter of 1.50" ( 1 1/2" ) so they will fit into a standard rod holder! The length of the weight will be approx. 12 1/4" long The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 218.00 USD https://www.lakesidemolds.com/product/deep-drop-weight-mold-2-cavity-8-and-8 https://assets.bigcartel.com/product_images/335023692/Weight+1.jpg https://assets.bigcartel.com/product_images/335023689/Weight+2.jpg,https://assets.bigcartel.com/product_images/335023686/Weight+3.jpg 89360352 new in stock 88775820 Aluminum Injection Bait Mold, 4 inch Fork Tail Minnow - TAIL SECTION ONLY Proudly made in the USA! 30 Cavity Fork Tail / Split Tail Minnow Mold ( This mold only makes the tail section that can be placed into our Split Tail Minnow Mold to allow you to have a different colored tails ) Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 75.00 USD https://www.lakesidemolds.com/product/aluminum-injection-bait-mold-4-inch-fork-tail-minnow-tail-section-only https://assets.bigcartel.com/product_images/333455682/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/333455694/s-l1600.jpg,https://assets.bigcartel.com/product_images/333455685/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/333455688/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/333455691/s-l1600+_4_.jpg 88775820 new in stock 86066448 Wax Worm Grub - 48 Cavity Soft Plastics Mold Proudly made in the USA! 48 Cavity Wax Worm Mold Mold makes Lures that are aprx 7/8" inch in length Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! 128.00 USD https://www.lakesidemolds.com/product/wax-worm-grub-48-cavity-soft-plastics-mold https://assets.bigcartel.com/product_images/326151489/Wax+2.jpg https://assets.bigcartel.com/product_images/326151492/Wax+1.jpg,https://assets.bigcartel.com/product_images/326151486/Wax+3.jpg 86066448 new in stock 85447725 Dredge Weight - Fish Shaped ( 12 LB ) Proudly made in the USA! 1 Cavity 12 LB Fish Shaped Dredge Weight Mold. This mold has been designed to ensure perfect pours each and every time. We added several vents in the mold to prevent air pockets. The mold is Very heavy duty.... both mold plates weigh 26 pounds, so the mold is very well built to ensure many years of use. Mold makes 12 LB weights. The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold features dowel pins to hold the downrigger eyelet clips in place during the casting process. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) This mold is precision machined out of 6061 Aluminum, and will last for years! 348.00 USD https://www.lakesidemolds.com/product/dredge-weight-fish-shaped-12-lb https://assets.bigcartel.com/product_images/324506151/Dredge+2.jpg https://assets.bigcartel.com/product_images/324506154/Dredge+1.jpg,https://assets.bigcartel.com/product_images/324506148/Dredge+3.jpg,https://assets.bigcartel.com/product_images/324506145/Dredge+4.jpg 85447725 new in stock 85447698 Dredge Weight - Fish Shaped ( 10 LB ) Proudly made in the USA! 1 Cavity 10 LB Fish Shaped Dredge Weight Mold. Please Note: The photo in this listing was from our one of our other size molds, so that's why it has a 6 on the fin. The mold you will receive will have the correct weight number. This mold has been designed to ensure perfect pours each and every time. We added several vents in the mold to prevent air pockets. The mold is Very heavy duty.... both mold plates weigh 22 pounds, so the mold is very well built to ensure many years of use. Mold makes 10 LB weights. The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold features dowel pins to hold the downrigger eyelet clips in place during the casting process. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) This mold is precision machined out of 6061 Aluminum, and will last for years! 318.00 USD https://www.lakesidemolds.com/product/dredge-weight-fish-shaped-10-lb https://assets.bigcartel.com/product_images/324506061/Generic+Dredg+3.jpg https://assets.bigcartel.com/product_images/324506064/Generic+Dredg+2.jpg,https://assets.bigcartel.com/product_images/324506067/Generic+Dredg+1.jpg 85447698 new in stock 85447671 Dredge Weight - Fish Shaped ( 8 LB ) Proudly made in the USA! 1 Cavity 8 LB Fish Shaped Dredge Weight Mold. Please Note: The photo in this listing was from our one of our other size molds, so that's why it has a 6 on the fin. The mold you will receive will have the correct weight number. This mold has been designed to ensure perfect pours each and every time. We added several vents in the mold to prevent air pockets. The mold is Very heavy duty.... both mold plates weigh 22 pounds, so the mold is very well built to ensure many years of use. Mold makes 8 LB weights. The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold features dowel pins to hold the downrigger eyelet clips in place during the casting process. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) This mold is precision machined out of 6061 Aluminum, and will last for years! 258.00 USD https://www.lakesidemolds.com/product/dredge-weight-fish-shaped-8-lb https://assets.bigcartel.com/product_images/324505983/Generic+Dredg+3.jpg https://assets.bigcartel.com/product_images/324505986/Generic+Dredg+2.jpg,https://assets.bigcartel.com/product_images/324505989/Generic+Dredg+1.jpg 85447671 new in stock 85447635 Dredge Weight - Fish Shaped ( 6 LB ) Proudly made in the USA! 1 Cavity 6 LB Fish Shaped Dredge Weight Mold. This mold has been designed to ensure perfect pours each and every time. We added several vents in the mold to prevent air pockets. The mold is Very heavy duty.... both mold plates weigh 16 pounds, so the mold is very well built to ensure many years of use. Mold makes 6 LB weights. The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold features dowel pins to hold the downrigger eyelet clips in place during the casting process. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) This mold is precision machined out of 6061 Aluminum, and will last for years! 238.00 USD https://www.lakesidemolds.com/product/dredge-weight-fish-shaped-6-lb https://assets.bigcartel.com/product_images/324505881/Generic+Dredg+3.jpg https://assets.bigcartel.com/product_images/324505884/Generic+Dredg+2.jpg,https://assets.bigcartel.com/product_images/324505887/Generic+Dredg+1.jpg 85447635 new in stock 85447605 Dredge Weight - Fish Shaped ( 4 LB ) Proudly made in the USA! 1 Cavity 4 LB Fish Shaped Dredge Weight Mold. Please Note: The photo in this listing was from our one of our other size molds, so that's why it has a 6 on the fin. The mold you will receive will have the correct weight number. This mold has been designed to ensure perfect pours each and every time. We added several vents in the mold to prevent air pockets. The mold is Very heavy duty.... both mold plates weigh 16 pounds, so the mold is very well built to ensure many years of use. Mold makes 4 LB weights. The mold uses larger downrigger style eyelet hooks to add that extra strength. Mold features dowel pins to hold the downrigger eyelet clips in place during the casting process. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) This mold is precision machined out of 6061 Aluminum, and will last for years! 228.00 USD https://www.lakesidemolds.com/product/dredge-weight-fish-shaped-4-lb https://assets.bigcartel.com/product_images/324505731/Generic+Dredg+3.jpg https://assets.bigcartel.com/product_images/324505734/Generic+Dredg+2.jpg,https://assets.bigcartel.com/product_images/324505737/Generic+Dredg+1.jpg 85447605 new in stock 78730731 1 LB Cod Sinker ( 10 Cavity ) Production Mold Proudly made in the USA! 10 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes 1 LB weights. The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 198.00 USD https://www.lakesidemolds.com/product/8-cavity-1-lb-cod-sinker-production-mold https://assets.bigcartel.com/product_images/407562159/20250711_154645.jpg https://assets.bigcartel.com/product_images/407562162/20250711_154641.jpg,https://assets.bigcartel.com/product_images/407562165/20250711_154624.jpg 78730731 new in stock 78039225 4 inch Fork Tail Minnow Soft Plastics Mold Proudly made in the USA! 10 Cavity Fork Tail / Split Tail Minnow Mold Mold makes Lures that are aprx 4 inch in length Mold features air vents to prevent air pockets and flashing during the injection process. This mold is precision machined out of 6061 Aluminum, and will last for years! Satisfaction guaranteed.... or your purchase price will be cheerfully refunded. 120.00 USD https://www.lakesidemolds.com/product/4-inch-fork-tail-minnow-soft-plastics-mold https://assets.bigcartel.com/product_images/303919092/20210430_193901.jpg https://assets.bigcartel.com/product_images/303919095/20210430_193907.jpg,https://assets.bigcartel.com/product_images/303919098/20210430_203322.jpg,https://assets.bigcartel.com/product_images/303919101/20210430_203343.jpg,https://assets.bigcartel.com/product_images/303919104/20210430_203314.jpg 78039225 new in stock 77483490 3 oz Pyramid Sinker Production Mold ( 12 cavity ) 3 oz Pyramid Sinker Production Mold ( 12 cavity ) Setup for #2 eyelet clips. This mold features metal pins to hold the eyelet clips in place so they don't fall into the cavity prior to the casting process which helps speed up production. This mold also features air vents to prevent air pockets 238.00 USD https://www.lakesidemolds.com/product/3-oz-pyramid-sinker-production-mold-12-cavity https://assets.bigcartel.com/product_images/302284548/Graphic1.JPG https://assets.bigcartel.com/product_images/302284602/20210415_141211.jpg,https://assets.bigcartel.com/product_images/302284605/20210415_141308.jpg,https://assets.bigcartel.com/product_images/302284608/20210415_141326.jpg,https://assets.bigcartel.com/product_images/302284611/20210415_141355.jpg 77483490 new in stock 77108466 3 oz Bell Sinker Mold - ( Setup for Swivels ) Aluminum CNC 10 Cavity 3 oz Bell Sinker Mold The mold is set up for #7 Do-it #1913 Size 7 Barrel Swivels Hinged mold with easy grip handles. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 168.00 USD https://www.lakesidemolds.com/product/3-oz-bell-sinker-production-mold-10-cavity https://assets.bigcartel.com/product_images/301206435/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/301206447/s-l1600.jpg,https://assets.bigcartel.com/product_images/301206438/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/301206441/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301206444/s-l1600+_4_.jpg 77108466 new in stock 77108265 2 LB Cannon Ball Deep Drop Weight Mold ( 5 Cavity ) Proudly made in the USA! 5 Cavity 2 LB Cannon Ball Deep Drop Weight Mold. Mold makes 2 LB weights. Please Note: This quality mold is made with 1 3/4" thick aluminum plate to prevent heat warping. This will ensure years and years of use. The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 218.00 USD https://www.lakesidemolds.com/product/2-lb-cannon-ball-deep-drop-weight-mold-5-cavity https://assets.bigcartel.com/product_images/301205934/s-l1600.jpg https://assets.bigcartel.com/product_images/301205925/s-l1600+_1_.jpg,https://assets.bigcartel.com/product_images/301205928/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/301205931/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301205937/s-l1600+_4_.jpg 77108265 new in stock 77108130 10 lb Cod Sinker / Deep Drop Weight Mold - FITS ROD HOLDERS - Proudly made in the USA! Cod Sinker / Deep Drop Weight Mold that will fit in rod holder. Mold makes 10 LB weights. The weights have a diameter of just over 1 1/4" on one end so they will fit into a standard rod holder! ( The opposite end has a diameter of 2" ) The mold uses down rigger eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. Please Note: When I poured the test pour for the photo my mold was still cold, so that is the reason for the wrinkled texture on the weight, under normal conditions the weight will have a smooth surface. This mold is precision machined out of 6061 Aluminum, and will last for years! 198.00 USD https://www.lakesidemolds.com/product/10-lb-cod-sinker-deep-drop-weight-mold-fits-rod-holders https://assets.bigcartel.com/product_images/301205511/s-l1600.jpg https://assets.bigcartel.com/product_images/301205502/s-l1600+_1_.jpg,https://assets.bigcartel.com/product_images/301205505/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/301205508/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301205514/s-l1600+_4_.jpg 77108130 new in stock 77107917 Saltwater Jigging Spoon Mold with Fish Scale Texture 4 Cavity Saltwater or Fresh Water Jigging Spoon mold with a fish scale surface ( Sizes of finished Jigs are 4 oz, 6 oz, 8 oz, 10 oz ) Mold has been precision machined out of 6061 Aluminum. The cavities in the mold are straight up and down which helps get perfect castings each and every time! Mold is set up for #3 eyelet hooks. On one end there is a channel cut in which allows you to attach the barrel swivel prior to casting, but this is not necessary. The mold features (3) spring loaded clamps which hold the two mold plates tightly together without the need for separate clamp..... The spring clamp style mold is super easy to use and eliminates the worry of trying to keep the plates tight during the casting process. 188.00 USD https://www.lakesidemolds.com/product/saltwater-jigging-spoon-mold-with-fish-scale-texture https://assets.bigcartel.com/product_images/301204767/s-l1600.jpg https://assets.bigcartel.com/product_images/301204755/s-l1600+_1_.jpg,https://assets.bigcartel.com/product_images/301204758/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301204761/s-l1600+_4_.jpg,https://assets.bigcartel.com/product_images/301204764/s-l1600+_5_.jpg 77107917 new in stock 77107668 Cod Sinker / Deep Drop Weight Mold 5 LB ( 2 Cavity ) 2 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes (2) 5 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 178.00 USD https://www.lakesidemolds.com/product/cod-sinker-deep-drop-weight-mold-5-lb-2-cavity https://assets.bigcartel.com/product_images/301204014/s-l1600.jpg https://assets.bigcartel.com/product_images/301204005/s-l1600+_1_.jpg,https://assets.bigcartel.com/product_images/301204008/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/301204011/s-l1600+_3_.jpg 77107668 new in stock 77107497 Cod Sinker / Deep Drop Weight Mold ( 2 Cavity ) 4# - 5# 2 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes 4 LB, 5 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 178.00 USD https://www.lakesidemolds.com/product/cod-sinker-deep-drop-weight-mold-2-cavity-4-5-aluminum-cnc https://assets.bigcartel.com/product_images/301203393/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/301203396/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/301203399/s-l1600.jpg 77107497 new in stock 77107437 Cod Sinker / Deep Drop Weight Mold 4 LB ( 2 Cavity ) 2 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes (2) 4 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #3 eyelet hooks Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. The Sprue is designed so that it will easily break off with a clean break ( no need for cutter ) Mold features air vents to prevent air pockets during the casting process. This mold is precision machined out of 6061 Aluminum, and will last for years! 168.00 USD https://www.lakesidemolds.com/product/cod-sinker-deep-drop-weight-mold-4-lb-2-cavity-aluminum-cnc https://assets.bigcartel.com/product_images/301203108/s-l1600.jpg https://assets.bigcartel.com/product_images/301203105/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/301203102/s-l1600+_1_.jpg 77107437 new in stock 77107371 Cod Sinker / Deep Drop Weight Mold ( 3 Cavity ) 1# - 2# - 3# 3 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes 1 LB, 2 LB, 3 LB weights. The weights have a diameter of just over 1 1/4" so they will fit into a standard rod holder! The mold uses #2 eyelet hooks for the 1 LB weight, and #3 eyelet hooks for the 2 and 3 LB weights. Mold has Spring Loaded clamps that hold the mold tight during the casting process and are used as handles to lift the top plate off. This mold is precision machined out of 6061 Aluminum, and will last for years! 148.00 USD https://www.lakesidemolds.com/product/cod-sinker-deep-drop-weight-mold-3-cavity-1-2-3-aluminum-cnc https://assets.bigcartel.com/product_images/301202841/s-l1600.jpg https://assets.bigcartel.com/product_images/301202844/s-l1600+_1_.jpg,https://assets.bigcartel.com/product_images/301202832/s-l1600+_2_.jpg,https://assets.bigcartel.com/product_images/301202835/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301202838/s-l1600+_4_.jpg 77107371 new in stock 77106918 Mustad 33903 Hooks - Size 2 / 4 / 6 ( 1,000 Pack ) Mustad 33903 Kink Shank Hook used in the Casting Minnow Molds Package Count: 1,000 pc 88.00 USD https://www.lakesidemolds.com/product/mustad-33903-size-2-1-000-pack https://assets.bigcartel.com/product_images/301201476/Mustad+33903-2.jpg 77106918 new in stock 77106900 Mustad 33903 Hooks - Size 2 / 4 /6 ( 500 Pack ) Mustad 33903 Kink Shank Hook used in the Casting Minnow Molds Package Count: 500 pc 58.00 USD https://www.lakesidemolds.com/product/mustad-33903-size-2-500-pack https://assets.bigcartel.com/product_images/301201572/Mustad+33903-2.jpg 77106900 new in stock 77106816 Mustad 33903 Hooks - Size 2 / 4 / 6 ( 200 Pack ) Mustad 33903 Kink Shank Hook used in the Casting Minnow Molds Package Count: 200 pc 26.00 USD https://www.lakesidemolds.com/product/mustad-33903 https://assets.bigcartel.com/product_images/301201254/Mustad+33903-2.jpg 77106816 new in stock 77106783 Mustad 33903 Hooks - Size 2 / 4 / 6 ( 100 Pack ) Mustad 33903 Kink Shank Hook used in the Casting Minnow Molds Package Count: 100 pc 14.95 USD https://www.lakesidemolds.com/product/mustad-33903-size-2-100-pack https://assets.bigcartel.com/product_images/301201062/Mustad+33903-2.jpg 77106783 new in stock 77094639 Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 1,000 pk ) Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 1,000 pk ) BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well. The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 237.00 USD https://www.lakesidemolds.com/product/plastic-tail-fins-for-3-4-oz-1-oz-casting-minnows-1-000-pk https://assets.bigcartel.com/product_images/301164051/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/301164063/s-l1600.jpg,https://assets.bigcartel.com/product_images/301164054/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301164057/s-l1600+_4_.jpg,https://assets.bigcartel.com/product_images/301164060/s-l1600+_5_.jpg 77094639 new in stock 77094576 Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 500 pk ) Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 500 pk ) BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well. The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 125.00 USD https://www.lakesidemolds.com/product/plastic-tail-fins-for-3-4-oz-1-oz-casting-minnows-500-pk https://assets.bigcartel.com/product_images/301163955/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/301163967/s-l1600.jpg,https://assets.bigcartel.com/product_images/301163958/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301163961/s-l1600+_4_.jpg,https://assets.bigcartel.com/product_images/301163964/s-l1600+_5_.jpg 77094576 new in stock 77094537 Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 200 pk ) Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 200 pk ) BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well. The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 58.00 USD https://www.lakesidemolds.com/product/plastic-tail-fins-for-3-4-oz-1-oz-casting-minnows-200-pk https://assets.bigcartel.com/product_images/301163847/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/301163859/s-l1600.jpg,https://assets.bigcartel.com/product_images/301163850/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301163853/s-l1600+_4_.jpg,https://assets.bigcartel.com/product_images/301163856/s-l1600+_5_.jpg 77094537 new in stock 77094501 Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 100 pk ) Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 100 pk ) BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well. The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 32.00 USD https://www.lakesidemolds.com/product/plastic-tail-fins-for-3-4-oz-1-oz-casting-minnows-100-pk https://assets.bigcartel.com/product_images/301163766/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/301163778/s-l1600.jpg,https://assets.bigcartel.com/product_images/301163769/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301163772/s-l1600+_4_.jpg,https://assets.bigcartel.com/product_images/301163775/s-l1600+_5_.jpg 77094501 new in stock 77094438 Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 50 pk ) Plastic Tail Fins for 3/4 oz & 1 oz Casting Minnows ( 50 pk ) BRAND NEW DESIGN! Wider tail fin for better action in the water Thicker plastic for more durability Deeper channel that the hook lays in End of fin is flared out for better action Available Colors: Clear or Red Plastic tail fin for minnow style fishing lures. These tail fins are glued on to the tail section using super glue or epoxy resin. We have found Gorilla Glue Super Glue ( Light Blue Top ) works well. The Red Color fins mimic a wounded minnow to the fish. Please note, You can select color choice when placing item in the shopping cart. 17.95 USD https://www.lakesidemolds.com/product/plastic-tail-fins-for-3-4-oz-1-oz-casting-minnows-50-pk https://assets.bigcartel.com/product_images/301163553/s-l1600+_1_.jpg https://assets.bigcartel.com/product_images/301163565/s-l1600.jpg,https://assets.bigcartel.com/product_images/301163556/s-l1600+_3_.jpg,https://assets.bigcartel.com/product_images/301163559/s-l1600+_4_.jpg,https://assets.bigcartel.com/product_images/301163562/s-l1600+_5_.jpg 77094438 new in stock 77094198 Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 1,000 pieces - Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 1,000 pieces - 165.00 USD https://www.lakesidemolds.com/product/wire-inserts-used-in-3-4-1-oz-casting-minnow-jig-mold-1-000-pieces https://assets.bigcartel.com/product_images/301162941/s-l1600+_5_.jpg 77094198 new in stock 77094171 Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 500 pieces - Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 500 pieces - 89.95 USD https://www.lakesidemolds.com/product/wire-inserts-used-in-3-4-1-oz-casting-minnow-jig-mold-500-pieces https://assets.bigcartel.com/product_images/301162887/s-l1600+_5_.jpg 77094171 new in stock 77094159 Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 200 pieces - Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 200 pieces - 49.00 USD https://www.lakesidemolds.com/product/wire-inserts-used-in-3-4-1-oz-casting-minnow-jig-mold-200-pieces https://assets.bigcartel.com/product_images/301162851/s-l1600+_5_.jpg 77094159 new in stock 77094117 Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 100 pieces - Wire Inserts used in 3/4 & 1 oz Casting Minnow Jig Mold - 100 pieces - 27.00 USD https://www.lakesidemolds.com/product/wire-inserts-used-in-3-4-1-oz-casting-minnow-jig-mold-100-pieces https://assets.bigcartel.com/product_images/301162827/s-l1600+_5_.jpg 77094117 new in stock